Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
04:33:27 - 04/28/2024

Dakota Performance
FromMessage
racerX
Dodge Dakota
JOIN HERE


5/28/2004
16:37:57

Subject: RE: Fan removal question
IP: Logged

Message:
all i did with mine was sprayed it with some parts loosener, clamped on a vise grip and hit the vise with a rubber mallet. took a few tries but it popped loose eventually with a good solid smack, then just spun it right off. did this to my '02 3.9 with a factory electric fan. i also removed the fan shroud, so now you can see the front of my motor much easier, really opens up the engine compartment. it runs awesome, great free mod




racerX
Dodge Dakota
JOIN HERE


5/28/2004
16:37:58

RE: Fan removal question
IP: Logged

Message:
all i did with mine was sprayed it with some parts loosener, clamped on a vise grip and hit the vise with a rubber mallet. took a few tries but it popped loose eventually with a good solid smack, then just spun it right off. did this to my '02 3.9 with a factory electric fan. i also removed the fan shroud, so now you can see the front of my motor much easier, really opens up the engine compartment. it runs awesome, great free mod




racerX
Dodge Dakota
JOIN HERE


5/28/2004
16:37:58

RE: Fan removal question
IP: Logged

Message:
all i did with mine was sprayed it with some parts loosener, clamped on a vise grip and hit the vise with a rubber mallet. took a few tries but it popped loose eventually with a good solid smack, then just spun it right off. did this to my '02 3.9 with a factory electric fan. i also removed the fan shroud, so now you can see the front of my motor much easier, really opens up the engine compartment. it runs awesome, great free mod




racerX
Dodge Dakota
JOIN HERE


5/28/2004
16:37:58

RE: Fan removal question
IP: Logged

Message:
all i did with mine was sprayed it with some parts loosener, clamped on a vise grip and hit the vise with a rubber mallet. took a few tries but it popped loose eventually with a good solid smack, then just spun it right off. did this to my '02 3.9 with a factory electric fan. i also removed the fan shroud, so now you can see the front of my motor much easier, really opens up the engine compartment. it runs awesome, great free mod




racerX
Dodge Dakota
JOIN HERE


5/28/2004
16:39:02

RE: Fan removal question
IP: Logged

Message:
so, standing at the front of the truck facing the engine, you hafta spin the wrench from right to left? ive been out trying to get my fan removed, sprayed on some bolt loosener and smacked it with a hammer & 2x4, just spinning the water pump...





racerX
Dodge Dakota
JOIN HERE


5/28/2004
16:39:36

RE: Fan removal question
IP: Logged

Message:
so, standing at the front of the truck facing the engine, you hafta spin the wrench from right to left? ive been out trying to get my fan removed, sprayed on some bolt loosener and smacked it with a hammer & 2x4, just spinning the water pump...





racerX
Dodge Dakota
JOIN HERE


5/28/2004
17:06:43

RE: Fan removal question
IP: Logged

Message:
..wtf?



another mark
Dodge Dakota
JOIN HERE


5/28/2004
17:32:41

RE: Fan removal question
IP: Logged

Message:
Yes hit from the right to the left. Two hits and mine loosened 5 years after I bought the truck. I used some WD40. Just dont get any on the belt.





another mark
Dodge Dakota
JOIN HERE


5/28/2004
17:33:12

RE: Fan removal question
IP: Logged

Message:
Yes hit from the right to the left. Two hits and mine loosened 5 years after I bought the truck. I used some WD40. Just dont get any on the belt.





another mark
Dodge Dakota
JOIN HERE


5/28/2004
17:33:41

RE: Fan removal question
IP: Logged

Message:
Yes hit from the right to the left. Two hits and mine loosened 5 years after I bought the truck. I used some WD40. Just dont get any on the belt.





another mark
Dodge Dakota
JOIN HERE


5/28/2004
17:34:12

RE: Fan removal question
IP: Logged

Message:
Yes hit from the right to the left. Two hits and mine loosened 5 years after I bought the truck. I used some WD40. Just dont get any on the belt.





matt
Dodge Dakota
JOIN HERE


5/28/2004
17:51:25

RE: Fan removal question
IP: Logged

Message:
Is there an echo in here?!?!?!?



matt
Dodge Dakota
JOIN HERE


5/28/2004
17:55:41

RE: Fan removal question
IP: Logged

Message:
to "umm".... Ive had to sit on my engine to do a few things before, so don't knock it...sometimes its just easier to sit on the intake than to stand 3 feet away from it... so piss off....



matt
Dodge Dakota
JOIN HERE


5/28/2004
17:56:00

RE: Fan removal question
IP: Logged

Message:
Is there an echo in here?!?!?!?




matt
Dodge Dakota
JOIN HERE


5/28/2004
17:56:00

RE: Fan removal question
IP: Logged

Message:
Is there an echo in here?!?!?!?




matt
Dodge Dakota
JOIN HERE


5/28/2004
17:56:35

RE: Fan removal question
IP: Logged

Message:
Is there an echo in here?!?!?!?




matt
Dodge Dakota
JOIN HERE


5/28/2004
17:57:02

RE: Fan removal question
IP: Logged

Message:
Is there an echo in here?!?!?!?




matt
Dodge Dakota
JOIN HERE


5/28/2004
17:57:29

RE: Fan removal question
IP: Logged

Message:
Is there an echo in here?!?!?!?




another mark
Dodge Dakota
JOIN HERE


5/28/2004
20:39:27

RE: Fan removal question
IP: Logged

Message:
What the hell is going on with this thread?



racerX
Dodge Dakota
JOIN HERE


5/28/2004
21:09:29

RE: Fan removal question
IP: Logged

Message:
i think the smartass from the first page is copy/pasting



  <<Previous Page P 2 Next Page>>


 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.