| From | Message |
2000QC4x4
Dodge Dakota
JOIN HERE
1/15/2006
18:26:38
|
 Subject: OBD2 Code P1294???
IP: Logged
Message:
I was just driving normally today down the road and my check engine light came on. The code i pulled up was P1294 and i looked it up and it said "Injector High Side Open - Bank 2/Target idle not reached" what does that mean? Any help would be great.
2000 QC 4x4 4.7L Automatic
|
caulk04
GenIII
 
1/15/2006
21:34:23
| RE: OBD2 Code P1294???
IP: Logged
Message:
Never seen that one before...
I'd reset it and see if it ever comes back. Could have been a fluke. If it does come back, I'd run some good injector cleaner (like Seafoam) and reset it again.
EDIT - Checked that code out myself and got: "P1294 (M) Target Idle Not Reached Target RPM not achieved during drive idle condition. Problem vacuum leak or IAC (AIS) lost steps."
If it gets persistent, check out all your vac lines for cracking etc. IAC is on the throttle body below the throttle position sensor. Both of these are on the drivers side of the TB just behind the intake.
'02 CC 4x4 4.7 HO
http://www.cardomain.com/ride/2147050 <- Check it out!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
