Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
03:01:10 - 04/20/2024

V8 Dakotas
FromMessage
ron
Dodge Dakota
JOIN HERE
 Email

10/23/2005
11:10:31

Subject: wrecked dak
IP: Logged

Message:
just aquired my dads 91 dakota, it has front end damage,,lookin for hood, bumper, radiator support, air dam and grill...thank god she only hit a tire on a big 4x4...anyone have any ideas on where to find some inexpensive parts so i can get this great truck back on the road?



sully88
Dodge Dakota
JOIN HERE


10/23/2005
23:42:55

RE: wrecked dak
IP: Logged

Message:
ebay, that's where i would start. They have a lot of cheap stuff on there, and most of it is brand new. If not there, JC Whitney might have some front end clips for you. Good luck
!



sully88
Dodge Dakota
JOIN HERE


10/23/2005
23:43:35

RE: wrecked dak
IP: Logged

Message:
ebay, that's where i would start. They have a lot of cheap stuff on there, and most of it is brand new. If not there, JC Whitney might have some front end clips for you. Good luck
!



Woodrow
Dodge Dakota
JOIN HERE
 Email

10/24/2005
00:17:41

RE: wrecked dak
IP: Logged

Message:
I would look at salvage yards. I have a 93 and I need core support and left front fender. Remember the parts you buy are a cheep knock off of what you get from OEM.Parts are made in China and most won't fit right.. You can get them from a salvage yard from about $75 to $400 depending on the condition of the part and if you look hard enough you could probably find on the same color as your truck. Just a note. As I found out the core support is not a complete bolt on part you have to cut and reweld the new part. Goodluck



ron
Dodge Dakota
JOIN HERE
 Email

10/24/2005
05:11:16

RE: wrecked dak
IP: Logged

Message:
Yeah, ebay hasnt been much help...prices are ok...but some of the shipping costs are astronomical...hope i have better luck at the salvage yards, i didnt realize the core support was welded, im hoping that i dont have to replace that, I will see when i tear into it. thanks for your help and input.



gen1dak
Dodge Dakota
JOIN HERE


10/24/2005
13:55:30

RE: wrecked dak
IP: Logged

Message:
Looking at the 1993 FSM, the core support appears to be held in place by 6 bolts, 3 per side. Nothing about welding is mentioned in the installation procedure. Not saying you're wrong, just curious where you had to cut and weld it.



daddio
Dodge Dakota
JOIN HERE
 Email

10/24/2005
13:57:29

RE: wrecked dak
IP: Logged

Message:
you could try www.car-part.com. check it out.



ron
Dodge Dakota
JOIN HERE
 Email

10/24/2005
16:01:20

RE: wrecked dak
IP: Logged

Message:
hey daddio, thanks, that helped alot..found alot of the parts i need very close to local, and at the kind of prices i was looking for.



daddio
Dodge Dakota
JOIN HERE
 Email

10/24/2005
16:05:13

RE: wrecked dak
IP: Logged

Message:
your welcome ron. i've used them a couple times. i helped a friend find an auto tranny for a Ford Exploder and the place he got it from gave him a 6 month warranty and it was really cheap. like 450 dollars + shipping.



ron
Dodge Dakota
JOIN HERE
 Email

10/24/2005
16:54:27

RE: wrecked dak
IP: Logged

Message:
just read the estimate from mike anderson dodge in marion indiana for repairs on this dak. they say it has 4700 dollars in damage....what a joke. they want to replace both fenders....not a ding on em, the latch, and safety.....whoops still works....both headlights and doors....not a scratch on em. jeeze guess they didnt want to work on it too bad. looks like i wont even need the core support. just mostly cosmetic, and a radiator...life is good. thanks for your help fellas




daddio
Dodge Dakota
JOIN HERE
 Email

10/24/2005
17:02:41

RE: wrecked dak
IP: Logged

Message:
that's not bad. HAH! last december my dak had a fight with a school bus. the bus won but had to pay right at 9g's to put a new front clip on my dak along with a few other things.



woodrow
Dodge Dakota
JOIN HERE
 Email

10/24/2005
20:43:09

RE: wrecked dak
IP: Logged

Message:
A bodyshop told me that it had to be cut and rewelded. It would be nice if all I had to do is unbolt it and rebolt the new piece. Mine was $5300. I hit a black cow on a black highway.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.