Forums
Forum Tools
|
 |
23:34:35 - 04/26/2024
V8 Dakotas
| From | Message |
Need4Speed
Dodge Dakota
JOIN HERE
10/12/2005
21:04:58
|
 Subject: Air Cleaner
IP: Logged
Message:
I had this idea for an air cleaner modification, I did it on another vehicle I had and it seemed to work pretty well. I have a K&N air filter with my stock air cleaner (pipe runs out to behind the grille). What I was thinking of doing is going to a junk yard and getting another air cleaner, removing the snorkel, and then cutting a hole in my air cleaner, opposite the original snorkel, and mounting another snorkel with the tube going to the driver's side inner fender well. Has anyone tried anything like this? It seems like it would work well, and I KNOW I need to get more air to this engine to make it perform. Any suggestions?
Thanks! -Matt
'94 Dak, 5.2, A/T, K&N, open cat, straight single exhaust, accel super coil, Autolite Platinum 3924's, electric fan, Mopar Performance PCM, 180 t-stat
|
.boB
Dodge Dakota
JOIN HERE
10/12/2005
23:59:03
|  RE: Air Cleaner
IP: Logged
Message:
Pretty common practice "back in the day". Take a look at pictures of old drag cars, especially Fords. It works for them. Will you gain an advantage? Hard to say; but it would look cool.
|
brandon
Dodge Dakota
JOIN HERE
10/13/2005
10:29:13
| RE: Air Cleaner
IP: Logged
Message:
Ive had the best luck with a cowl hood and a old school round filter
2000 dakota R/T 5.9 cam, high rise intake, injectors, headers, MSD ign. blastercoil, K@N, platinum 4s, Zex 75hp shot.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
