| From | Message |
Andrew
Dodge Dakota
JOIN HERE
8/29/2005
00:13:34
|
 Subject: Brake/Signal/Hazards
IP: Logged
Message:
When I put on the RIGHT turn signal, on some instances, my hazard lights go on. The dealer (and old postings on this site) told me it was the multi-function switch. I replaced the switch, and still have the same problem. Also, I have noticed that my LEFT brake light is not working. The left turn signal and hazards will flash normal. I replaced the bulb...no change. Any suggestions for either problem, or are they linked? Thanks!
|
Andrew
Dodge Dakota
JOIN HERE
8/29/2005
00:20:09
| RE: Brake/Signal/Hazards
IP: Logged
Message:
Sorry...I have a 2002, QC, 4.7L, 5-spd. I know there was a "wiring harness" recall completed, although I am not really sure what that affected.
|
vern
Dodge Dakota
JOIN HERE
8/29/2005
06:04:08
|  RE: Brake/Signal/Hazards
IP: Logged
Message:
can,t say for sure this will help you,
but yrs ago i had a Chrysler Lazer that did about the same,it was the hazzard switch button going in to far,the reg signals and the brake lights feed thru the harrard switch
my guess the hazzard switch is the problem
|
bigdave
Dodge Dakota
JOIN HERE
8/30/2005
09:52:31
| RE: Brake/Signal/Hazards
IP: Logged
Message:
Have you installed a trailer wireing kit lately? I bought one a few years ago and it did the same thing because a few wires were crossed.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
