Forums
Forum Tools
|
 |
04:51:43 - 04/26/2024
V8 Dakotas
| From | Message |
dan
Dodge Dakota
JOIN HERE
8/19/2005
23:08:07
|
 Subject: 4 different codes,need help??
IP: Logged
Message:
hey guys,My Father-in-law just purchased a Dodge Dakota 4.7 automatic with 50,000 miles. 200 miles later..... the check engine light came on!! I ran a check for the codes, came up with:
P0201
P0204
P0207
P0208
It says something with the fuel injection, Not sure what this means, does anyone know what these mean, and how it can be fixed???? and on top of those problems, he is having a problem with his warranty!!!! Someone please HELP :(
Thanks
|
ObieWonDakota
Dodge Dakota
JOIN HERE
8/20/2005
00:06:49
|  RE: 4 different codes,need help??
IP: Logged
Message:
P0201 - Injector #1 Control Circuit An open or shorted condition detected in control circuit
P0204 -Injector #4 Control Circuit Injector #4 or INJ 4 injector bank output driver stage does not respond properly to the control signal
P0207 - Injector #7 Control Circuit Injector #7 output driver stage does not respond properly to the control signal
P0208 - Injector #8 Conrol Circuit Injector #8 output driver stage does not respond properly to the control signal
Those are what the codes mean, but never worked with injectors before. Someone on here more than likely has and can answer the technical aspect of the question.
|
Kowalski
GenIII
8/20/2005
07:43:45
| RE: 4 different codes,need help??
IP: Logged
Message:
If you're in the USA, that should be covered by the federal emissions waranty - make sure dealer acknowledges that if you have them work on it. I've seen it posted that a bad TPS can set ignition codes; or the problem could be a lot more complicated. I'd bring it in for warranty service.
Lead, follow, or get out of the way
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
