| From | Message |
318mag
Dodge Dakota
JOIN HERE
6/24/2005
11:31:18
|
 Subject: 318 what!!!!!!!!!!!
IP: Logged
Message:
[url]http://mywebpages.comcast.net/seanmca79/it_runs.wmv[/url]
|
MoparMadness
Dodge Dakota
JOIN HERE
6/24/2005
12:49:29
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
what mods?
|
Android287
GenIII
6/25/2005
00:00:07
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
Wow can i get a video of that thing just idling for like a minutes. That sounds nasty!
|
GraphiteDak
GenIII
6/25/2005
00:43:15
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
Nice. Sounds like you are just dumping the exhaust under the cab though.
Like Android said. Too bad you didn't have a clip of it idling longer.
I've got OLD videos of my past cars, many WAY more radical than my Dak is. I wish I had longer clips of it just sitting there idling.
I've got a sound clip to my Mustang I had. It ran about 10.5 or slightly better compression ratio and a pretty wicked Comp Cams camshaft that made one nasty idle.
Carberated with a single plane intake and 650 Dbl Pumper. Hard to remember them carberated days :p
Click here to hear Idle then Burn Out
Where his idles at the end, mine idles at the beginning of the sound clip. I wish my Dak idled like that!
|
IntenseDak39
*GenIII*
6/25/2005
11:37:47
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
it's got a "decent" cam for a magnum motor.. it's greg555's truck and he did have an idle video on another site. He was having trouble with it running but i believe he got it all fixed up with dodgeboy the other night.
should expect a new video soon.
open exhaust really does make it sound good though.
|
sicminds
GenIII
6/26/2005
12:14:03
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
what cam is in that 318, i will be upgrading mine soon.
|
IntenseDak39
*GenIII*
6/26/2005
14:32:55
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
i need to correct myself.. it's a crappy spintech muffler.. i've got two of them and it might as well be open exhaust.
his cam 220/230 duration .507/.507 lift and 114 LS
|
greg555
Dodge Dakota
JOIN HERE
6/27/2005
09:38:21
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
the spintech is actually quiter then i expected it to be. its dumped right before the axle. we had a couple open header videos. still trying to get the cam timing right... this regrind sucked. should be running soon. the truck is running out of ideas on how to break itself....
|
greg555
Dodge Dakota
JOIN HERE
6/27/2005
10:13:08
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
short lope video. 350rpms.............
http://mywebpages.comcast.net/seanmca79/got_lope.wmv
|
GraphiteDak
GenIII
6/28/2005
00:21:20
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
Dude. You had that thing idling SO LOW of an RPM, it's hard to tell the difference form a LOPE to something trying to stall!!! LOL! 
Usually a enegine with a descent street cam will be closer to 1000 to 1100 RPM's. NOT 350 RPM's 
Was that like when you were first getting it running? Got one with it running at a NORMAL idle yet? :)
|
Greg555
Dodge Dakota
JOIN HERE
6/28/2005
12:49:52
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
yeah the idle is set at about 800. sounds nasty and shakes the whole truck. the 350 was from a scanner running a min airflow test. which resulted in 350 rpms
|
IntenseDak39
*GenIII*
6/28/2005
14:12:19
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
sucks that it's not running good greg..
best of luck with it!!
|
greg555
Dodge Dakota
JOIN HERE
6/28/2005
15:06:42
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
turning some wrenches tonight so we'll see how far i get.
|
John Force
Dodge Dakota
JOIN HERE
6/28/2005
15:17:40
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
but can it go as fast as it sounds?
|
HAH
Dodge Dakota
JOIN HERE
7/01/2005
13:54:57
| RE: 318 what!!!!!!!!!!!
IP: Logged
Message:
mabye if he ever gets it tuned in right
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
