| From | Message |
Ray
Dodge Dakota
JOIN HERE
4/16/2005
16:00:40
|
 Subject: 4.7 Jet Chip
IP: Logged
Message:
I need help. I got a Jet chip for 2001 4.7 Dak and I don't have instructions. Can anyone guide me in the right direction?
|
Rick
Dodge Dakota
JOIN HERE
4/16/2005
20:59:58
| RE: 4.7 Jet Chip
IP: Logged
Message:
Disconnect neg. bat cable,turn key in the start pos. for 15sc turn off key.
The chip go's on the all black plug on the pcm on the pass. side fender push down on the clip on top of the plug and pull it out.
plug in the jet chip taking your time not to bend any of the pins,make sure it is all the way in then plug in the harness and reconnect neg. bat. cable.
|
Yep
Dodge Dakota
JOIN HERE
4/19/2005
23:45:17
| RE: 4.7 Jet Chip
IP: Logged
Message:
Then with everything Ive seen and heard. Drive around, take it to the track, disconnect neg batt cable, dissconect harness, unplug Jet chip, and teach it how to FLY!
|
TexasTodd
Dodge Dakota
JOIN HERE
4/21/2005
14:52:21
| RE: 4.7 Jet Chip
IP: Logged
Message:
Instructions for a Jetchip, on a 4.7?
1. Stack paper on your desk.
2. Set Jet chip on the stack.
3. If it doesn't work properly, try flipping it over 180 degrees.
4. Marvel at the money you just spent on a worthless POS, that makes a pretty damn good paper weight!
|
Yep
Dodge Dakota
JOIN HERE
4/21/2005
23:12:51
| RE: 4.7 Jet Chip
IP: Logged
Message:
Hey Todd I prefer the fly method myself, but would make a good paperweight.
As a side note me and a buddy have passed one back and forth, and to different people we know with 4.7s with no cosistent or reproducable effects whatsoever.
Thats track time though, no dynos avalable around here.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
