| From | Message |
crazy8888
Dodge Dakota
JOIN HERE
8/30/2004
14:51:11
|
 Subject: Belt tensioner
IP: Logged
Message:
I just put on the 150 fan and at the same time I did the crank pullie and belt. Now I have been having problems with the belt screeching and when the fan kicks on I can watch the volt guage drop almost to twelve volts while sitting at idle. Now I went to autozone and had the alternator tested and it checked out fine, and its the 134Amp unit. So I am wondering if the tensioner is bad are there any ways to test it? Or is that ASP pullie too small for the job in wich case I need to put the stock one back on???? Please help thanks
|
afinkel
Dodge Dakota
JOIN HERE
8/30/2004
15:16:13
|  RE: Belt tensioner
IP: Logged
Message:
I did the same thing, but I did 2 other pulies at the same time. My battery was going dead and stuff. Took that crap off. Hope this helps.
|
?
Dodge Dakota
JOIN HERE
8/30/2004
15:38:02
| RE: Belt tensioner
IP: Logged
Message:
did you install a shorter belt to go with that smaller pulley?
|
crazy8888
Dodge Dakota
JOIN HERE
8/31/2004
00:13:17
| RE: Belt tensioner
IP: Logged
Message:
yea I took the part number to pep boys and they gave me the belt. Its a 6 rib instead of the 7 rib, the dam thing screeches like a chevy pos when I start it up after its been sitting. I am getting real frustrated and I dont know what I should do.
|
daddio
Dodge Dakota
JOIN HERE
8/31/2004
11:33:26
| RE: Belt tensioner
IP: Logged
Message:
double check the size belt they gave you or replace the tensioner. i've got a pulley on mine and have never had that problem.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
