| From | Message |
Ross
Dodge Dakota
JOIN HERE
8/15/2004
16:13:36
|
 Subject: 318 Manifolds
IP: Logged
Message:
Would the Manifolds off of an old 318 Magnum from a 92/93 which had the larger inner diameter fit on my newer 318 which is in a 99? its also a 4x4.
|
prple-gaseatr
Dodge Dakota
JOIN HERE
8/15/2004
16:23:21
|  RE: 318 Manifolds
IP: Logged
Message:
they should fit ok, only if they came off a magnum motor. pre-mag stuff wont work
|
YES
Dodge Dakota
JOIN HERE
8/15/2004
18:30:41
| RE: 318 Manifolds
IP: Logged
Message:
They will fit, you will need the coresponding Y pipe or have one made. The 92-93 are 2 1/8" the newer are 1 7/8". The lowdown is that they are worth approx. 10 hp.
|
Ross
Dodge Dakota
JOIN HERE
8/15/2004
20:06:41
| RE: 318 Manifolds
IP: Logged
Message:
so it would be basically a factory fit, without the cost of aftermarket...
i can get some of the stuff at a junk yard and then just clean them up and coat with high heat paint...
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
