| From | Message |
Mark40
Dodge Dakota
JOIN HERE
3/30/2002
12:58:36
|
 Subject: Truck box for 2001 Dakota Quadcab
IP: Logged
Message:
I have been unable to find a a truck box that will fit my bed (65" 57", 8"). Does anyone know where I can get a scratch and dent or a new one which wont break the bank?
Thanks.
|
LSU Mech Eng
Dodge Dakota
JOIN HERE
3/31/2002
23:20:46
|  RE: Truck box for 2001 Dakota Quadcab
IP: Logged
Message:
I put a Husky brand aluminum diamond plate truck box on my 01 Quad Cab last May. Bought it at Home Depot for around $175. They had black and silver. Basically it's meant for a Ford Ranger sized bed, but if you buy about 4' of 1.5" x 1.5" Aluminum Angle (also available at Home Depot) you can mount it using four bolts per side. The width of the box is slighty less than the cab width. I had to use the angle because I only had about 1/4" of overhang on each bedrail. I cut the angle to length and bolted it to the side rails, then set the box in position and bolted the box to the angle. I used wing nuts on the box to angle bolts so that I could remove the box when I need to carry something large. Let me know if you have any more questions.
|
ogreboy
Dodge Dakota
JOIN HERE
4/02/2002
15:00:19
| RE: Truck box for 2001 Dakota Quadcab
IP: Logged
Message:
I got a UWS Slimline box - fit's my '01 QC great. Check out [http://uwsta.com/truckblue.html#SLIMLINE]. I don't think they are super cheap, but great quality and the perfect size.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
