Forums
  Forum Tools
|
|
01:56:58 - 12/11/2024
V8 Dakotas
From | Message |
Jag Dodge Dakota JOIN HERE
5/28/2004 22:36:13
|
Subject: MSD-6 wiring ?s for R/T IP: Logged
Message: had a few questions for wiring my new MSD-6A. I haven't got started yet, but thought I would get a clear cut plan of what to do before I start.
Any other parts/wiring needed besides what is supplied with the MSD-6A (#6200)?
Power & Ground wiring are easy...
Do I need to wire in the switch wire (small red)?
I assume I splice the coil wires (black & orange) into the stock wiring (black/grey & green/red) to the stock coil.
Black/grey is ground and green/red is +?
Trigger wires:
Do I use the white wire or purple/green wiring?
My guess is that I would use the purple/green wiring and run it to the three-wire loom running to the base of the distributor. What do I splice to?
Any suggestions or tips would be greatly appreciated
|
Jag Dodge Dakota JOIN HERE
5/29/2004 14:30:21
| RE: MSD-6 wiring ?s for R/T IP: Logged
Message: Anyone?
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|
|