| From | Message |
JV
Dodge Dakota
JOIN HERE
4/28/2004
15:56:39
|
 Subject: HP upgrades 4.7L
IP: Logged
Message:
I have a 2000 QC 4x4, flowmaster muffler, K&N filter,
Weld rims, pro comp X-terrain's, 3" lift. Looking for
performance upgrades to increase horsepower and
torque (not towing, just for fun). Headers I know, but
what else can I do? Intake? Chip? Looking for bolt
on's....appreciate any input. Fairly novice, so specifics
help a ton. Thanks.
|
uioh
Dodge Dakota
JOIN HERE
4/28/2004
22:10:22
|  RE: HP upgrades 4.7L
IP: Logged
Message:
Change out the cams. Just do a search on H.O. cams. That is about all you can do to get noticable changes.
|
Kowalski
Dodge Dakota
JOIN HERE
5/02/2004
09:18:10
| RE: HP upgrades 4.7L
IP: Logged
Message:
You'd also see decent gains from a PCM flash - you could get the Mike Leach flash for your '00. You could swap your 65 mm TB for a 68 mm out of a '01; and port it.
Don't expect much of a gain from the available short tube headers for the 4.7.
|
Paul
Dodge Dakota
JOIN HERE
5/02/2004
12:30:02
| RE: HP upgrades 4.7L
IP: Logged
Message:
KRC 212 cams !!!!
|
black2003
Dodge Dakota
JOIN HERE
5/02/2004
14:20:59
| RE: HP upgrades 4.7L
IP: Logged
Message:
I wouldn't recommend the KRC 212 cams. The HO cams are the best for toque and horsepower from 200-5500. The newer 03/04 manifolds alos help out even better with the uper rpms. The fast man throttle body 68mm helps to complement the cams and intake. A gear swap also works wonders. Especially if you are running bigger tires. They are expensive, but i feel they are well worth it.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
