| From | Message |
Nick Hinshaw
Dodge Dakota
JOIN HERE
2/20/2004
22:03:32
|
 Subject: need some cam help
IP: Logged
Message:
goen to be doen some major mods to the motor this next winter. getten all the pars lined up. have a 98 5.2 dakota. have the r/t heads, and worken on getting a 4 inch stroker - pistons - rods adn goen to be looken at cames to go with that combo. not looken for somethen taht is goen to be insane but just somethen that is goen to make this motor come to life. have headers and low flow cats. looken to get the m1 intake for it to. but i just need some info on what to get for a cam. dont know if the r/t cam is goen to work well with all that or not. trying to keep compression below 9.5:1. 10:1 the most. has to be able to run premium. having custom coputer made by jett. some suggestions on lift and duration. what ratio rockers to work with that. thanks
|
janesy
Dodge Dakota
JOIN HERE
2/20/2004
22:24:19
|  RE: need some cam help
IP: Logged
Message:
Talk to Marty at KRC he'll be able to figure a cam out for ya
|
b1llyw
GenII
2/21/2004
11:07:17
| RE: need some cam help
IP: Logged
Message:
Yep, we'd love to help you out. Here's the site:
http://www.krcperformance.com
Feel free to shoot me an e-mail with any questions.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
