| From | Message |
ekdane
Dodge Dakota
JOIN HERE
2/18/2004
08:45:25
|
 Subject: Air Force One Intakes
IP: Logged
Message:
Looking to get an intake for my 03 4.7 Dakota. Had bad experience with a 360AirIntakez. I was leaning towards the K&N, but would like something with a stainless steel or aluminum tube. Does anyone have an Air Force One intake installed?
|
midnightmagic
GenIII
2/18/2004
09:32:51
| RE: Air Force One Intakes
IP: Logged
Message:
ill take a picture of my setup and try to post it, i have part numbers too
You gotta ask yourself one question...That Thing Got A HEMI???
|
Rob C
Dodge Dakota
JOIN HERE
2/18/2004
12:05:22
|  RE: Air Force One Intakes
IP: Logged
Message:
The reason most manufacturers use composite tubing is because metal conducts heat very well. Heat is the last thing you want to do to the intake air. Except for startup during cold weather.
|
ekdane
Dodge Dakota
JOIN HERE
2/19/2004
08:28:01
| RE: Air Force One Intakes
IP: Logged
Message:
midnightmagic
do you like you Air Force intake?
|
midnightmagic
GenIII
2/20/2004
09:22:11
| RE: Air Force One Intakes
IP: Logged
Message:
i dont have a air force intake i have a filter airaid part number 720-440 it was 60 bucks, with a 3 inch rubber pvc coupler right off the tb, i love it when you step in it, sounds like i have a 4 barrel carb under the hood, freaks alot of people out. when my new computer comes in ill post a pic on my website.
You gotta ask yourself one question...That Thing Got A HEMI???
|
midnightmagic
GenIII
2/23/2004
15:18:52
| RE: Air Force One Intakes
IP: Logged
Message:
i have the pics downloaded i will get the link by tonight
You gotta ask yourself one question...That Thing Got A HEMI???
|
midnightmagic
GenIII
2/26/2004
13:35:39
| RE: Air Force One Intakes
IP: Logged
Message:
here is the link
http://sleeper287ci.250free.com/AirRaid2.jpg
http://sleeper287ci.250free.com/AirRaidIntake.jpg
thats how my setup is
You gotta ask yourself one question...That Thing Got A HEMI???
|
4x4Dak
Dodge Dakota
JOIN HERE
2/26/2004
21:32:12
| RE: Air Force One Intakes
IP: Logged
Message:
Hey midnightmagic,
You got some part numbers for that vent line set up?
01 QC 4x4 4.7L 5spd 3.92LS
HO Cams, Ported TB, Volant CAI, 180 stat, Amsoil on everything, Flowmaster 40 series, Optimizer II(not worth the money), Bosch Platinums, 3" lift, 33" BFG AT’s, Rancho RS9000x's, Smittybilt Nerf Bars, Westin Safari Bar w/ 2 150watt 6” KC’s, Clear corners
|
midnightmagic
GenIII
2/26/2004
23:48:22
| RE: Air Force One Intakes
IP: Logged
Message:
you mean for those little filters? go to the rice section at your nearest autozone or checker or pep boys, its the little breather filters, they will require alittle work to open them up a bit to fit. the part # for the main filter is
air raid 720-440 its $60.00 . sounds like im packin a 4 barrel under the hood.
You gotta ask yourself one question...That Thing Got A HEMI???
|
Roger Moore
Dodge Dakota
JOIN HERE
2/28/2004
12:51:21
| RE: Air Force One Intakes
IP: Logged
Message:
midnightmagic, is that a little rubbage action above the "I D" in AIRAID. not that it matters either way, just wondering if the hood rubs a little bit.
|
midnightmagic
GenIII
2/28/2004
13:28:48
| RE: Air Force One Intakes
IP: Logged
Message:
might be just a smigde, ill have to look at it, good thing its rubber!
You gotta ask yourself one question...That Thing Got A HEMI???
|
Gabe
Dodge Dakota
JOIN HERE
2/29/2004
02:27:49
| RE: Air Force One Intakes
IP: Logged
Message:
Did you get any economy improvements with that custom air intake or is it just sound and torque/hp?
|
midnightmagic
GenIII
2/29/2004
21:50:49
| RE: Air Force One Intakes
IP: Logged
Message:
picked up 3 mpg, and its got a little more low end grunt.
You gotta ask yourself one question...That Thing Got A HEMI???
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
