Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
05:11:13 - 04/20/2024

V8 Dakotas
FromMessage
dakotaracer02
Dodge Dakota
JOIN HERE
 Email

2/09/2004
00:42:22

Subject: torque management system
IP: Logged

Message:
does anyone know how to do the torque managment disconect? i dont know which wire or port or whatever i need to cut so if anyone could tell me and show pics please? please help!!



boggerdak
Dodge Dakota
JOIN HERE


2/09/2004
17:45:36

RE: torque management system
IP: Logged

Message:
I just did this to my truck over the weekend. Very noticeable difference.

Go to
www.dodgedakotas.com/boards/v8/4867.html
and read through all the posts. You'll find what your looking for there.



dakotaracer02
Dodge Dakota
JOIN HERE


2/09/2004
17:49:38

RE: torque management system
IP: Logged

Message:
ok can you tell me how to do it????



kevin
Dodge Dakota
JOIN HERE
 Email

2/19/2004
13:24:55

RE: torque management system
IP: Logged

Message:
I read the linked post. Would this mod work for a 2003 5.9? I am going to look for the yellow/green wire over the weekend.



Paul
Dodge Dakota
JOIN HERE
 Email

2/19/2004
14:33:03

RE: torque management system
IP: Logged

Message:
As of yet I don't think anyone has found away to disconnect the torque management on an 03'. The TCM (transmision control module) is located within the ECM. I've got the service manual and I've been looking through the schematics to figure out a way but no luck yet.



Paul
Dodge Dakota
JOIN HERE
 Email

2/20/2004
01:05:57

RE: torque management system
IP: Logged

Message:
I take that back. I know nothing of the 5.9.



midnightmagic
GenIII
 User Profile


2/20/2004
09:15:40

RE: torque management system
IP: Logged

Message:
it only works on the 45rfe tranny, 00-03 i belive 4.7 motors. if you pcm has 3 plug ins then it will work, i cut mine and hooked it up to a switch in my iat aduster box, works like a charm. its about 30 min of work to route the wire and splice in stuff. soon as i get my new puter in i will take pics of where i cut and spliced and put it on my webpage.

You gotta ask yourself one question...That Thing Got A HEMI???

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.