| From | Message |
Mike Pine
Dodge Dakota
JOIN HERE
2/07/2004
00:11:15
|
 Subject: Late model heads on early model engine
IP: Logged
Message:
Hey guys,
I've just been givin an early model 360 engine. I think it's a 1978. Can anyone tell me for sure if the heads and intake from a 1999 or around that year 360 will fit that early block? I'd like to rebuild that 360 and convert it to EFI if the late model stuff will work. Please help!
|
IntenseDak39
*GenIII*
2/07/2004
00:43:38
| RE: Late model heads on early model engine
IP: Logged
Message:
it will work but you gotta do a few things...
get aftermarket lifters with oil bleeds in em
measure for pushrod lenght after heads are on using an adjustable pushrod.
thats it. as long as you are using magnum heads, a magnum manifold should bolt up to it.
|
b1llyw
GenII
2/07/2004
07:45:29
| RE: Late model heads on early model engine
IP: Logged
Message:
It's got different motor mounts too. Sorry Mike, I don't think it would be worth your while.
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
