| From | Message |
01sweetRT
Dodge Dakota
JOIN HERE
1/16/2004
12:20:04
|
 Subject: R/T heads m-1 & 52mm TB
IP: Logged
Message:
OK guys im looking for the cheapest place to buy street ported 2.02 1.65 R/T Heads a M-1 and a 52mm alumninum TB. I want to buy the item and have all the gaskets and bolts and mountign kit included. Who Should i go to? alos what would these mods alone do to a stock R/T???
Also you can check out my truck here
http://www.cardomain.com/id/01sweetrt
|
01sweetRT
Dodge Dakota
JOIN HERE
1/16/2004
12:51:35
| RE: R/T heads m-1 & 52mm TB
IP: Logged
Message:
also where can i pick up an m-1 turtle at?
|
Greg
Dodge Dakota
JOIN HERE
1/17/2004
21:02:32
| RE: R/T heads m-1 & 52mm TB
IP: Logged
Message:
You can get your Holley dual 52mm Performance TB for 5.9l/5.2l from mainjet@comcast.net "Scott Hafer" for around $150 - $160 shipped... Only drawback is you might have to space up your plastic intake cover "if stock" with some seals $14.00 at most. because may be warped enough on your old one to make a big diff and you'll have to use "off of your old one" or buy a sensor that goes on the back of it... Don't know about any of your other questions though, sorry...
|
rtspeeddemon
Dodge Dakota
JOIN HERE
1/19/2004
10:58:28
| RE: R/T heads m-1 & 52mm TB
IP: Logged
Message:
Sam Parthemer www.socaldakota.com 619-274-1292
|
R/T
Dodge Dakota
JOIN HERE
1/19/2004
13:21:46
| RE: R/T heads m-1 & 52mm TB
IP: Logged
Message:
Call John Mercedes for the heads. Phone number is on his website. southeastrt.com
|
Scott
Dodge Dakota
JOIN HERE
1/21/2004
21:39:39
|  RE: R/T heads m-1 & 52mm TB
IP: Logged
Message:
My heads just shipped from John Mercedes this week so I have not been able to check them out yet, but be forewarned that I waited about 3 months for my heads to be sent (which were promised within one month). Seems like a nice guy, but his business savvy leaves a bit to be desired. I highly recommend using a credit card for payment. I also got a cam from him.
Scott
|
Greg
Dodge Dakota
JOIN HERE
1/21/2004
21:49:37
| RE: R/T heads m-1 & 52mm TB
IP: Logged
Message:
You know I never thought about it before, but hughesengines.com has TB's with dual 53 or 54mm bores available for the 5.9's... I think, but not sure about this particular TB, that you can send them your old one and they will port and shave it out to the bigger size for around $165.00... You may want to look into this as well, if you haven't allready gotten another one or sold your old one...
|
b1llyw
GenII
1/22/2004
10:19:14
| RE: R/T heads m-1 & 52mm TB
IP: Logged
Message:
We'd love to set you up with whatever you need.
http://www.krcperformance.com
Bill White - KRC Performance
'95 CC 4x2, SLT - 408 is done, truck isn't
'03 Ram 1500 QC 4x4 Hemi Off-Road
|
R/T
Dodge Dakota
JOIN HERE
1/22/2004
10:44:59
| RE: R/T heads m-1 & 52mm TB
IP: Logged
Message:
I'm sure you will be glad you waited 3 months. They probably just got backed up. He probably sells some of the best heads out there if not THE best. Good guy to deal with.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
