| From | Message |
Mikes94Dakota
Dodge Dakota
JOIN HERE
10/09/2003
15:18:14
|
 Subject: V8 TB
IP: Logged
Message:
Ok I was thinking about getting an R/T Tb for my 94 v-6 dak. Problem is I heard it only works in the 4 grand and up range...true or not...and I know the TB will get worse low-end and I dont want that but what is the tru benefit from this upfgrade?
|
Mikes94Dakota
Dodge Dakota
JOIN HERE
10/10/2003
14:24:13
| RE: V8 TB
IP: Logged
Message:
Anyone?
|
95 dak
Dodge Dakota
JOIN HERE
10/11/2003
05:14:21
| RE: V8 TB
IP: Logged
Message:
318, mopar computer, intake, posi, trans 355 gears (top end) , shift kit. bye bye stock RT. one die hard motor, never had a problem with it.
|
bigredram4x4
Dodge Dakota
JOIN HERE
10/12/2003
11:32:26
|  RE: V8 TB
IP: Logged
Message:
It is a good upgrade. I've talked to people with Gen 2 Daks and they went from a V8 TB up to a 50mm on a V6 and love it. The worst that can happen is you won't like it and you'll have to change it back. I have a 52mm on my fairly stock 5.9 and it runs awesome. Trial and error is the best method.
|
Gen II Geoff
Dodge Dakota
JOIN HERE
10/15/2003
12:49:37
| RE: V8 TB
IP: Logged
Message:
Before I dropped the 318 in my truck I put on a v8 tb and it added some nice top end but lost too much torque. The six doesn't have enough of that as it is. I ported out my old tb, removed the air horns and polished the ports up a bit. That, to me, was much better than the v8 tb.
Not quite as much top end but the difference in torque made up for it
Hope this helps
Geoff
|
gen1dak
Dodge Dakota
JOIN HERE
10/15/2003
23:00:04
| RE: V8 TB
IP: Logged
Message:
You're only gonna realize improvements in lower rpm range with V8 TB if you make other changes like cam etc.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
