Forums
Forum Tools
|
 |
23:23:35 - 04/23/2024
V8 Dakotas
| From | Message |
Maximus
Dodge Dakota
JOIN HERE
6/29/2003
19:36:20
|
 Subject: carb v8 conversion
IP: Logged
Message:
I know you guys always say just buy an R/T, but if i had a 97and up dakota and wanted to install a 5.2 or 5.9 motor but carborate it would that be easy. I figured the motor mounting and stuff would not be bad because you can get those motors factory. So i figured i could use factory motormonts. I would plan on replaceing the trans, drive shaft and rebuilding the rear. I just woundering if putting the motor in the truck and linening it up would be difficult.
thanks
Maximus
|
John Thomas
Dodge Dakota
JOIN HERE
7/07/2003
12:18:02
|  RE: carb v8 conversion
IP: Logged
Message:
Hey my dakota is still EFI but I know some People that has converted there dakota over to carb. and slowed down. But they only had a 650 CFM, so I would try it and see how it does. And I dont think that you will have to change your drive-shaft because I bet that it is A518 trans up under there, and then if it is all you will have to do is get one out of 90-96 V8 dakota because they are not electric shifting.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
