Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
10:41:04 - 03/29/2024

V8 Dakotas
FromMessage
IdahoRT
Dodge Dakota
JOIN HERE
 Email

4/05/2003
19:46:09

Subject: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
The short of it: I am going to be the prototype for development of a turbo kit for the 4.7L engine. One of my autoxing friends, who owns a speed shop called "Idaho Speed Center", has made me a proposition to develop a turbo kit for the 4.7 he will market.
So, we'd be interested in some feedback. Idaho Speed Center does a lot of performance work, metal fabrication, welding, suspension, chassis, drivetrain, fuel, exhaust, etc, etc on a full range of vehicles.

We had my truck on the hoist today and we're starting to develop the plan of attack so to speak. I asked him about a timeline and he said whenever I'm ready to commit they'll start tearing into my truck.

Our thinking goes along the lines of offering two kits. Both of which will be designed to work with the factory PCM since options there are pretty much limited.
The kits he would like to offer are summed up as follows:

Kit1: Single turbo, non-intercooled, 5-6psi
Kit2: Single turbo, air to air intercooled, 7-9psi

Option1: We're exploring the possibility of having the complete exhaust system as an additional option. (Both kits by default would include all plumbing/pipes down to the main catalyst.)

Both kits would be sold with all necessary parts, pieces, instructions, sims, etc. We will be doing dyno runs before and after on an otherwise completely stock 4.7. We are considering using either a T04R or GT25 turbo.
Both kits would be sold as "off-road only" kits. The intercooled version will more than likely require a bit more work on the consumers end since the only way to get one in there that will provide proper cooling will be to relocate the radiator/condensor back. However, we will include any brackets, fittings, hoses, etc as required. In order to relocate the condensor, the AC system will have to be evacuated.

Anyway, that's where the project stands and we'd like feedback from any potential customers.
Any thoughts, opinions, etc would be appreciated, as well as what you expect to pay for either kit and if you would be interested in one.

For anyone who is interested, my email is idboi@earthlink.net
Thanks,
Jason aka IdahoRT




Derek
Dodge Dakota
JOIN HERE
 Email

5/02/2006
23:11:51

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
i have a 4.7L jeep grand cherokee laredo, and from what i understand it would be the same motor.and with that i would be a potential customer so let me know about any developements ext. thank you
Derek



Izzy
Dodge Dakota
JOIN HERE
 Email

5/03/2006
10:27:51

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
Interested in how this would turn out. We own a Dakota and a Durango.



Obio3
Dodge Dakota
JOIN HERE


5/03/2006
18:21:28

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
Sold as "OFF ROAD KITS ONLY" ---- This implies NOT street legal. If so that's going to kill sales in any state that requires emission checks and in reality any state reguardless in order to comply with the laws. Not many out there that run there Dakotas in the dirt only.

So many problems .... So little time



ecdak
Dodge Dakota
JOIN HERE


5/03/2006
20:37:12

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
if not smog legal, how hard would the install, uninstall be for a fairly novice owner. Non inter cooled of course. I know it is still early in your project, but what are the early cost estemates for said kit or kits?



modain
GenIII
 Email User Profile


5/03/2006
20:53:24

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
Planning on keeping the Dak after all, ecdak? Or are you asking for the benefit of the less-than-expert-mechanic owners?

What's your left foot doing?
=========================================
2002 Graphite QC SLT Plus, 4.7L, NV3500, Superchips 3715, 3.92 LSD, loads o'fun...
2001 Patriot Blue Durango SLT, 4.7L, 45RFE, Superchips 3715, 3.55 Open (for now)
1999 Forest Green Dakota RC Sport, 2.5L, NV1500, 3.55 Open


RyanH
Dodge Dakota
JOIN HERE


5/05/2006
11:25:02

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
I saw a complete turbo kit with intercooler on ebay for the 4.7L daks. I think it was around 6500. If I find it again I'll post the link.



RyanH
Dodge Dakota
JOIN HERE


5/05/2006
11:27:25

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
Here it is

http://cgi.ebay.com/ebaymotors/02-Dodge-Dakota-4-7L-Turbo-Kit-UPD-Custom-Kit_W0QQitemZ8025104168QQcategoryZ6763QQssPageNameZWD1VQQrdZ1QQcmdZViewItem



GraphiteDak
GenIII
 Email User Profile


5/05/2006
23:37:02

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
Well I think there are TWO different exhaust set ups on the 4.7 Dakota's. So right there is something that wont be BOLT ON for all 4.7 Daks as far as exhaust goes.







trucky
Dodge Dakota
JOIN HERE
 Email

5/06/2006
23:23:17

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
is that ebay link a joke? since when does a single turbo throw on more horsepower than a stock truck? i know its just a dyno estimate but isnt that way off? or am i wrong



GraphiteDak
GenIII
 Email User Profile


5/07/2006
23:51:12

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
Well let's see. A 4.7 is rated around 235 HP. Kinda under rated if you ask me but that is what it is. Torque is another story though.


Now Duner's Turbo 4.7 is said to be well over 500 HP.

So in that sense, it added MORE HP than what the engine started out with.





SinCity R/T
Dodge Dakota
JOIN HERE
 Email

5/08/2006
13:04:37

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
Duner's truck has a lot more modifications than just the turbo kit, and he usually runs in the 12-14psi range - he's blown through two motors in the R&D process.

SinCity R/T
2003 Black Dakota R/T
2003 White Dakota R/T
http://www.dakota-durango.com



Duner
Dodge Dakota
JOIN HERE


5/08/2006
15:53:08

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
There's nothing wrong with the kit on ebay - it works as advertised.

I broke the 4.7 more than twice - more like 5 or 6 times. I broke two BLOCKS. They couldn't be repaired and I had to get others. Those parts were sacrificed in an R & D effort while I "played" with the turbo setup. The limit for the stock rotating assembly looks to be about 500 hp. Once you cross that line it's just a timebomb waiting to go. The stock rods will only take so much before they begin to bend. I think you could probably run 7-9psi of boost forever though, (350 to 375 hp) without any consequences at all.



trucky
Dodge Dakota
JOIN HERE
 Email

5/09/2006
00:53:12

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
hm that makes more sense...but if u want more...we're talking about roller rockers...cams...rods and pistons...all upgrades to handle the power right?



Duner
Dodge Dakota
JOIN HERE


5/09/2006
11:55:56

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
Crank, Rods & Pistons would do the trick.



GraphiteDak
GenIII
 Email User Profile


5/10/2006
01:30:36

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
^^^^^ Which they do not make :( Correct me if I am wrong.

I have ONLY found the pistons at KRC, but are pricey!


So I know how you broke the FIRST block with the stuck waste gate. How did you break the second block?????


Also, are you still wowing your toy hauler with this truck???

I hope that mine holds together a bit longer since it's going to be in a car that barely hits the 3,000 Lb mark :)



Andrew
Dodge Dakota
JOIN HERE


5/14/2006
22:29:02

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
You would want a H.O. forged crank over the stock 4.7's crank, also you can get Eagle rods for the 4.7 and Ross pistons.

Andrew



gabe
Dodge Dakota
JOIN HERE
 Email

4/29/2010
15:23:51

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
hi i have a 2002 dodge ram 1500 with the 4.7 v8 and have everything to turbo charge it on my own with a inter cooler and i was wondering how much the motor can handle for psi with the turbo. it a small garrett turbo /r .48. thanks



mike lyons
Dodge Dakota
JOIN HERE
 Email

1/26/2012
11:25:41

RE: 4.7 Turbo Kit: Survey, Info, & Input
IP: Logged

Message:
I have a 02 jeep gc 4.7 v8 H.O can it handle a small garret
turbo off a saab 93. Its going to be rebuilt first of all, and
what is needed



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.