Forums
Forum Tools
|
 |
18:56:30 - 04/19/2024
V8 Dakotas
| From | Message |
Brad
Dodge Dakota
JOIN HERE
3/04/2003
13:06:00
|
 Subject: Tayor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
Is this an OK combo to use on for a decent upgrade on lightly modded truck (99 RT CC, MOPAR PCM, home-brew intake,cat back duals)? Are these part #s correct?
Taylor Spiro-Pro 8mm - 74276(red) 74676(blue)
Autolite 3923's - part #?, set to .40
Borg warner cap and rotor - part #'s
Are the wires a direct fit or do they need some adjusting and/or and adapter of some kind (i.e. new looms, etc.)?
|
Joe
Dodge Dakota
JOIN HERE
3/04/2003
13:18:41
|  RE: Tayor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
Could you cross-post this to more forums please? Thanks.
|
Brad
Dodge Dakota
JOIN HERE
3/04/2003
13:38:25
| RE: Tayor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
If that's a crack and I made mistake by posting in the three forums, then that's my bad. I don't no who reads what or where.
|
ME 111
R/T
3/04/2003
15:35:15
| RE: Tayor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
I perceived that as a crack...now you know not to do that again. We're watching you(while shaking index finger firmly in your direction)
Now...as for your Q's go
Don't know the part #s but I had no problem swapping my wires out for the Taylors. I left everything as is/was on my swap. Good time to do the wire re-route as well if not already done.
For the mods you listed..I would say that combo will suffice just dandy.
Flame Red '99 R/T CC
52mm TB - HomeBrewed K&N Intake, Optima Red Top, 3923 AutoLites, Taylor 8mm wires, TPS @.73 , 180 TStat , Falken 285/60/R17s on Rear, RoadMaster Active Suspension, SS rollpan, XTang soft Tonneau, Mopar Bra
And one Heavy Foot
|
ME 111
R/T
3/04/2003
15:36:20
| RE: Tayor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
I perceived that as a crack...now you know not to do that again. We're watching you(while shaking index finger firmly in your direction)
Now...as for your Q's go
Don't know the part #s but I had no problem swapping my wires out for the Taylors. I left everything as is/was on my swap. Good time to do the wire re-route as well if not already done.
For the mods you listed..I would say that combo will suffice just dandy.
Flame Red '99 R/T CC
52mm TB - HomeBrewed K&N Intake, Optima Red Top, 3923 AutoLites, Taylor 8mm wires, TPS @.73 , 180 TStat , Falken 285/60/R17s on Rear, RoadMaster Active Suspension, SS rollpan, XTang soft Tonneau, Mopar Bra
And one Heavy Foot
|
Brad
Dodge Dakota
JOIN HERE
3/05/2003
18:19:23
|  RE: Tayor Spiro & 3923's, OK combo for RT?
IP: Logged
Message:
Thanks for your help
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
