| From | Message |
Kelby
Dodge Dakota
JOIN HERE
2/14/2003
00:23:48
|
 Subject: O2 sims/ how to get around the sensor?
IP: Logged
Message:
Hello, can someone tell me how to do the rigging to the o2 sensor on a 97 5.2 dakota?(resistor wired into the o2 sensor's wires?) Possibly send me pics or where to buy the 02 simulators?
|
Texas Todd
Dodge Dakota
JOIN HERE
2/14/2003
09:50:45
|  RE: O2 sims/ how to get around the sensor?
IP: Logged
Message:
Do a search here, an inexpensive one's instructions have been posted here, I think by conig.
|
conig
Dodge Dakota
JOIN HERE
2/14/2003
12:48:26
| RE: O2 sims/ how to get around the sensor?
IP: Logged
Message:
search under my name I have some detailed instructions posted. its simple you just splice a 650-680k resistor inline with the signal wire and a 1mfg capacitor across the reference and signal wire.
|
Brian C
Dodge Dakota
JOIN HERE
2/14/2003
18:45:14
| RE: O2 sims/ how to get around the sensor?
IP: Logged
Message:
Hey conig ..... check this site out and tell me if this would work for a O2 sim ...
http://jdmfan.com/technical/performance/o2sensor_simulator/
|
conig
Dodge Dakota
JOIN HERE
2/15/2003
13:52:50
| RE: O2 sims/ how to get around the sensor?
IP: Logged
Message:
thats basically a catbox and more complex then my method. the problem is were did you get that info from meaning. I use a modified mustang design. on my old ford I used a 1megaohm resistor and it worked fine. Ive tried that on my dak and kept getting checkengine lights because the pcm thought the cat was eorking to good. I tried a bunch of different resistor values and so far the 650k is the best I've found.
|
Brian C
Dodge Dakota
JOIN HERE
2/15/2003
16:13:48
| RE: O2 sims/ how to get around the sensor?
IP: Logged
Message:
It is from a Honda site.... i also own a civic and the simm worked fine for it ....
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
