| From | Message |
darcy
GenIII
2/08/2003
14:38:36
|
 Subject: 4.7 Intake Manifold
IP: Logged
Message:
Does any one know if anyone is producing a new intake manifold for the 4.7? I remember reading something on the KRC site that said they were working an a design but I haven't seen anything yet.
I'm asking because I was thinking of getting the HO intake manifold but I might hold off for a while if someone is coming out with a better design...
2002 Dakota Sport 4.7 V8 Club Cab
|
darcy
GenIII
2/08/2003
20:09:03
|  RE: 4.7 Intake Manifold
IP: Logged
Message:
Anyone?
2002 Dakota Sport 4.7 V8 Club Cab
|
CW
GenIII
2/08/2003
23:04:32
|  RE: 4.7 Intake Manifold
IP: Logged
Message:
Hope Marty doesn't mind but here is what he said when I questioned him on the 206 cams compatibility with the HO intake.
"The intake stock with the Haltech is pulling 6800rpm CW with the 206 cams and low compression, that is not a HO version either. It's changing my thoughts on this manifolds design."
SO no I think your best bet is the HO.
4.7 HO, CW style
2001 4.7 5sp 3.92 LSD
Ported 68mm TB, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" Z-tube, Roadmaster active suspention, Removed Third cat, Electric fan Convertion, HO cams, Robert shaw 180 therm, HO intake manifold.
|
darcy
GenIII
2/09/2003
15:27:26
|  RE: 4.7 Intake Manifold
IP: Logged
Message:
Great, thanks CW!
2002 Dakota Sport 4.7 V8 Club Cab
|
darcy
GenIII
2/09/2003
18:14:57
|  RE: 4.7 Intake Manifold
IP: Logged
Message:
How about the Hughes engines modified intake. How does it flow compared to the HO?
2002 Dakota Sport 4.7 V8 Club Cab
|
CW
GenIII
2/09/2003
18:50:44
| RE: 4.7 Intake Manifold
IP: Logged
Message:
I think all he did was shorten the runners a little more than the HO. The problem is the PCM programing in these trucks. That is what holds them back.
4.7 HO, CW style
2001 4.7 5sp 3.92 LSD
Ported 68mm TB, IAT adjuster, 3" flowmaster cat back, TPS @ .76V, 4" Z-tube, Roadmaster active suspention, Removed Third cat, Electric fan Convertion, HO cams, Robert shaw 180 therm, HO intake manifold.
|
Texas Todd
Dodge Dakota
JOIN HERE
2/10/2003
14:27:00
| RE: 4.7 Intake Manifold
IP: Logged
Message:
CW,
Would you say the best/easiest/price wise PCM mod for an 01 4.7 would be the KB Optiizer II?
I for one would really like to hear your views on this.
Thanks,
Todd Bouton
01, QC, SLT, TT, HD, T&H,
4.7, 5spd, HO cams, P&P 68mm TB, NO belt clutch/fan, home brew air with K&N drop in and air damn @intake taking air from rubber removed and fender opening.
|
Texas Todd
Dodge Dakota
JOIN HERE
2/11/2003
09:55:02
| RE: 4.7 Intake Manifold
IP: Logged
Message:
CW?
|
Wes
GenIII
2/11/2003
19:20:02
| RE: 4.7 Intake Manifold
IP: Logged
Message:
Isn't Jonas working on a intake manifold?
HO cams & intake, 70mm F&B, Z-tube, Borla headers, Gibson exhaust
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
