| From | Message |
R/T 02
Dodge Dakota
JOIN HERE
12/18/2002
13:31:13
|
 Subject: More power at higher RPM's?
IP: Logged
Message:
What is the best way to raise my shift point up to 6000-6500 RPM's? While also still producing power?
|
Anthony G
Dodge Dakota
JOIN HERE
12/18/2002
15:27:32
| RE: More power at higher RPM's?
IP: Logged
Message:
Another engine! Not many stock V8's hold up well at 6000-6500 RPM. Even the LS1 will blow at 6500 if pushed too many times. The LS6 would hold up a little better. But the current 5.9L@6500 would throw rods, push rods, valve float while making 100hp.
I wouldn't run them past 5500-5800 at most without stronger internals. You'll need a M1 intake, 210/220 or higher duration cam and a custom PCM. Good Luck.
|
R/T 02
Dodge Dakota
JOIN HERE
12/18/2002
20:18:16
| RE: More power at higher RPM's?
IP: Logged
Message:
OK thanks a lot. I will do that.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
