| From | Message |
AUjosh
Dodge Dakota
JOIN HERE
12/10/2002
14:55:22
|
 Subject: 2000 IAT sensor
IP: Logged
Message:
Does anyone have any experience making the 2000 4.7 IAT sensor fit with the HO intake manifold. I know the 2001's fit and the dealer said it would be around $50 for one of those. I would rather rig up something that works and save $50.
P.S. i dont really want to relocate it to the air intake, and if i did, i would still have to plug up the hole in the HO intake manifold.
thanks,
josh
|
Izzy
Dodge Dakota
JOIN HERE
12/10/2002
16:00:54
|  RE: 2000 IAT sensor
IP: Logged
Message:
Plug the hole and relocate it. I got a li'l more pep after moving mine. Just get a plug at the local hardware store to plug the hole. You can always come back later and pout it back if you want.
|
AUjosh
Dodge Dakota
JOIN HERE
12/10/2002
20:05:16
| RE: 2000 IAT sensor
IP: Logged
Message:
I dont think you are understanding me Izzy, i dont want to relocate it, and i cant put it in the HO intake manifold(where it belongs) because it doesnt fit. 2000 4.7's have a slightly different IAT sensor than 2001s and up.
|
Lab Rat
GenIII
12/10/2002
21:29:42
| RE: 2000 IAT sensor
IP: Logged
Message:
Your dealer is off on the price. Paid $25 for mine.
LR
|
nitroussteve
DakotaEnthusiast
12/11/2002
00:55:12
| RE: 2000 IAT sensor
IP: Logged
Message:
try a parts store like autozone or advance auto,sometimes they have those items cheaper than the dealer.
nitroussteve
watch out ya gonna get sprayed!(nx)
|
jasonsdakota
Dodge Dakota
JOIN HERE
11/05/2004
00:27:59
| RE: 2000 IAT sensor
IP: Logged
Message:
this old post sounds like my problem. just was doing a little (alot) of research. any current advice please.
2000 4.7 ext cab dakota AWD 4X4
HO CAMS, COLD AIR INTAKE, TRYING TO INSTALL HO MANIFOLD BUT IAT WONT FIT. MECHANIC IS ABOUT TO ORDER ONE FROM DEALER. ANY OPTIONS BESIDES RELOCATION?
|
StratMan
Dodge Dakota
JOIN HERE
11/05/2004
10:08:51
|  RE: 2000 IAT sensor
IP: Logged
Message:
The item in question..the IAT adjuster is a parafactual air pressure positive displacement accumlator. Its duty is to check the enthalpy of the incoming rush of ambient air temp and density compensating it with 350000 mfd capacitance flux incursion.After an intial reading of 40 giga ohm super inductance,the IAT adjusts the potentiometer to increase or decrease the amount of reflux voltage going into the the IAT inverter. This in turn boosts rwh by about 0.5 .
Hope this helps
|
N56629
Dodge Dakota
JOIN HERE
11/05/2004
13:08:06
| RE: 2000 IAT sensor
IP: Logged
Message:
Bull, I get over .63401 rwh.
|
Rob C
Dodge Dakota
JOIN HERE
11/06/2004
00:47:37
|  RE: 2000 IAT sensor
IP: Logged
Message:
http://www.buymopar.com/store/magnum.html
$5.75 at this site
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
