| From | Message |
PoolShark
Dodge Dakota
JOIN HERE
10/29/2002
00:45:48
|
 Subject: '92 5.2L Engine Specifications
IP: Logged
Message:
Hey guys, I'm trying to get my engine into desktop dyno, but I need some help with a lot of the stock specs from the engine. Is there a place where I can get all this stuff? Or do some of you know it and can just post it for me. I'd like to get it all loaded and then be able to do some tweaks and see how it will effect the hp and torque.
http://www.poolshark9.dns2go.com/download/desktopdyno.JPG
Here is a link to a pic of the Desktop Dyno 2000 screen. You can see all the spots that need to be filled in. So far the only thing I know for sure is the block info (bore/stroke).
|
PoolShark
Dodge Dakota
JOIN HERE
10/29/2002
02:23:26
|  RE: '92 5.2L Engine Specifications
IP: Logged
Message:
Here's what I came up with on my own. Does this look right?
http://www.poolshark9.dns2go.com/download/desktopdyno2.JPG
|
Brad
Dodge Dakota
JOIN HERE
10/29/2002
08:23:33
| RE: '92 5.2L Engine Specifications
IP: Logged
Message:
I have most of the specs set up on my desktop dyno. I could send you the file if you want.
Off the top of my head,
Cam is 250 degrees intake 264 exhaust.
Valve lift is .432 both intake and exhaust.
Should use tune port injection for the manifold unless you have the M1 manifold.
Valve size is 1.925 intake 1.625 exhaust.
|
PoolShark
Dodge Dakota
JOIN HERE
10/29/2002
08:39:12
| RE: '92 5.2L Engine Specifications
IP: Logged
Message:
Brad, that would be great if you could send me the file. They're pretty small files, can you just e-mail it to me? Do you have any other ones that you have set up for the magnum? Send those too if you can/want.
Thanks
poolshrk@new.rr.com
|
Brad
Dodge Dakota
JOIN HERE
10/29/2002
11:17:12
| RE: '92 5.2L Engine Specifications
IP: Logged
Message:
Sounds good. I have about 4 different ones done up. I'll send you a couple of them. I'll explain in the email what is what.
|
mcarthey
Dodge Dakota
JOIN HERE
7/10/2004
21:48:46
| RE: '92 5.2L Engine Specifications
IP: Logged
Message:
Yes, it's a really old link brought from the dead. Does any of the OP's have the file mentioned? Or perhaps another person that uses DD2000?
Thanks!
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
