Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
13:20:10 - 04/25/2024

V8 Dakotas
FromMessage
Shawn Casey
Dodge Dakota
JOIN HERE
 Email

9/27/2002
08:35:28

Subject: Hypertech Programer
IP: Logged

Message:
They are now available for our trucks and I ordered one yesterday should be here today. I will keep you updated on the performance gains can’t promise dyno results for atleast a couple of months

Casey




Dallas
Dodge Dakota
JOIN HERE


9/27/2002
09:41:20

RE: Hypertech Programer
IP: Logged

Message:
Where did you find it at?



Clevite 77
GenIII
 User Profile


9/27/2002
09:45:19

RE: Hypertech Programer
IP: Logged

Message:
what motor?


"If my calculations are correct, when this baby hits 88 miles per hour, you're gonna see some serious shit."

Shawn Casey
Dodge Dakota
JOIN HERE
 Email

9/27/2002
19:53:56

RE: Hypertech Programer
IP: Logged

Message:
I have a 2001 r/t and it didnt work had some sort of error code. I called hypertech and they said to return it so they can change out the software. I will let you know what happens when I get it back from them.

Casey

P.S.

Call hypertech the number is on the website they should be able to get you a programer.




Shawn Casey
Dodge Dakota
JOIN HERE
 Email

10/16/2002
23:07:13

RE: Hypertech Programer
IP: Logged

Message:
I got it back the other day and programed my computer it raised my shft points 500 rpm and increased the speed govener to 125 and for the hp gain i cant tell you i didnt dyno it but i can feel a difference




dac_beth
Dodge Dakota
JOIN HERE


10/17/2002
07:53:49

RE: Hypertech Programer
IP: Logged

Message:
Did you program for 87 or 93 fuel??



Shawn Casey
Dodge Dakota
JOIN HERE
 Email

10/17/2002
08:23:47

RE: Hypertech Programer
IP: Logged

Message:
I programed it for super unleaded 93 i cant wait to get my other parts in to see what this baby will do.
my completed mods

• Accell 300+ Race Wires
• Gibson Headers
• Autolite 3923 spark plugs .040 gapped
• Borg Warner Select Cap and Rotor
• K&N Generation II Air Intake
• Flow Master 40 Series Muffler
• Robert Shaw 180 deg High Flow thermostat
• Royal Purple Synthetic Oil
• Royal Purple Synthetic ATF
• Royal Purple Synthetic Gear Oil
• Royal Purple Purple Ice
• Nitto 450 Extremes 275/50/17VR tires
• Caltrax Traction System
• Bilstine Shocks
• Hotkich Performance Leaf Springs
• Hotkich Performance Coil Springs
• Hotkich Performance Sway Bars
• Venom VCN 400 Engine Control Module
• Hughes Performance 14” Cone Airfilter
• APS 52 mm Throttle Body
• Hypertech Power Programmer III

mods im waiting to put on or get in

• ASP Under Drive Crank Pulley
• Magnum Performance Valve Covers
• Ford Motor Sports 24 lb Fuel Injectors
• Mopar M-1 2bbl Intake Manifold
• ARP Head Stud Kit
• Mopar Performance Torque Converter
• Trans Go Shift Kit
• Crower 1.6 Roller Rockers
• NX Express Nitrous Kit
• Magnum R/T heads 2.02 StreetPortedHeads
• Comp Cam .512/.512 cam shaft
• O2 Simulators with Mopar Long Tube Headers
• NX Express Gen X II Accessory Kit
• Crower Chrome Molly Push Rods
• Cloyes Timing Chain




Anthony G
Dodge Dakota
JOIN HERE


10/17/2002
09:12:34

RE: Hypertech Programer
IP: Logged

Message:
Would it let you raise the RPM limit any higher?


4800+500=5300? I'm looking for 5400 or 5500 range :)

Is 125MPH it's max?



maniac
Dodge Dakota
JOIN HERE


10/17/2002
09:34:14

RE: Hypertech Programer
IP: Logged

Message:
Where did you find it at? Their website says they are available but there is no option to buy..



conig
Dodge Dakota
JOIN HERE
 Email

10/17/2002
10:23:50

RE: Hypertech Programer
IP: Logged

Message:
If one of your planed mods is the nx kit. why did you bother getting the hypertech controller? you will have to reprogram it back to stock for the n2o.



Shawn Casey
Dodge Dakota
JOIN HERE
 Email

10/18/2002
08:18:11

RE: Hypertech Programer
IP: Logged

Message:
If you want to buy it you have to call them its not on their website. The reason I bought it was the 500 rpm increase in the rev limiter which i need due to my new cam and the top end speed limiter increase.

Shawn



Shawn Casey
Dodge Dakota
JOIN HERE
 Email

10/18/2002
08:20:14

RE: Hypertech Programer
IP: Logged

Message:
Oh I almost forgot as new software changes develope you get up dates for the programer un like a reflashed pcm.

Shawn



MST
Dodge Dakota
JOIN HERE
 Email

10/18/2002
11:46:20

RE: Hypertech Programer
IP: Logged

Message:
I have a 99 RT and I'm considering a programmer. Nice to see some feedback here. Was wondering if it was worth the $435 they quoted me. The only other engine mod I've done is a K&N air system.

Mark



ME 111
R/T
 User Profile


10/18/2002
12:41:32

RE: Hypertech Programer
IP: Logged

Message:
Thought they were about $325 now...through RPMOUTLET.com

Flame Red '99 R/T CC
52mm TB - HomeBrewed K&N Intake - 3923 AutoLites - Un-Relocated IAT - TPS @.73 - 180 TStat
Falken 285/60/R17s on Rear - RoadMaster Active Suspension - SS rollpan - XTang soft Tonneau - Mopar Bra
And one Heavy Foot

mst1
Dodge Dakota
JOIN HERE
 Email

10/18/2002
12:53:12

RE: Hypertech Programer
IP: Logged

Message:
Thanks for the info ME 111. I'll check out that site. Was wondering if a distributer would have them less than the manufacturer. Looks like you might of saved me $100.



ME 111
R/T
 User Profile


10/18/2002
13:09:19

RE: Hypertech Programer
IP: Logged

Message:
Hey mst1...will try to save you even more as we are in the process of a group buy listed here..hoping for less than 300

Flame Red '99 R/T CC
52mm TB - HomeBrewed K&N Intake - 3923 AutoLites - Un-Relocated IAT - TPS @.73 - 180 TStat
Falken 285/60/R17s on Rear - RoadMaster Active Suspension - SS rollpan - XTang soft Tonneau - Mopar Bra
And one Heavy Foot

mst
Dodge Dakota
JOIN HERE
 Email

10/18/2002
13:19:37

RE: Hypertech Programer
IP: Logged

Message:
Sounds good to me! The more savings the better. Was hoping something like this site was out here. I have a old vette I'm fixing up so that sucks up most of my play $$$. I'll keep checking here for updates. I just found this site a while ago. I see RPMOUTLET is here in the Houston area. Not that it matters since they have free shipping too.

Thanks ME 111

Mark



ME 111
R/T
 User Profile


10/18/2002
13:35:50

RE: Hypertech Programer
IP: Logged

Message:
Envious of you mst1....you're living my dream(old vette and an R/T) Well, I'm halfway there anyway. Welcome aboard.

Flame Red '99 R/T CC
52mm TB - HomeBrewed K&N Intake - 3923 AutoLites - Un-Relocated IAT - TPS @.73 - 180 TStat
Falken 285/60/R17s on Rear - RoadMaster Active Suspension - SS rollpan - XTang soft Tonneau - Mopar Bra
And one Heavy Foot

mst
Dodge Dakota
JOIN HERE
 Email

10/18/2002
13:53:04

RE: Hypertech Programer
IP: Logged

Message:
I've had both for about a year now. The deal on the vette was just too sweet to walk away from. The RT was clean and fairly low mi., 28k. A guy at work asks me to sell it to him every now and then, but I'm not going for it.

Hey good talking to you ME 111. Catch you here again sometime. Got to get busy now. Thanks again for all the info. Your R/T looks pretty good.

Later
Mark



mst
Dodge Dakota
JOIN HERE
 Email

10/19/2002
09:43:06

RE: Hypertech Programer
IP: Logged

Message:
ME 111 mentioned a group buy on the programers for a better price. Is there any certain time when that will happen?? Somebody please let me know if that's a go.



Brad
Dodge Dakota
JOIN HERE
 Email

2/05/2003
02:13:28

RE: Hypertech Programer
IP: Logged

Message:
has anyone heard a definite date when hypertech will release one for the 4.7



Matt01RT
Dodge Dakota
JOIN HERE
 Email

2/05/2003
12:37:44

RE: Hypertech Programer
IP: Logged

Message:
I just wanted to say that I too have bought the hypertech programmer 3. I like Shawn, got the error code and had to send mine back. But they were quick to send it back. I sent it back to them on a Thursday afternoon aropund 3:30 and got it back Tuesday around 5:30. I was impressed with how quick they worked. I am glad that i bought it. I have a 2001 Dakota R/T with the 5.9 of course and I noticed a difference. I choose the 93 octain setting and the gover to 120...whatever. That was as high as it would go. I know that it is working by the power difference but I am finishing out the last bit of regular gas...not the 93...and it is pinging at hard throttle...so that shows the timing was changed. The shifts fell stronger too. I bought mine for $320. I would recamend this to anyone.



   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.