| From | Message |
Kellen
Dodge Dakota
JOIN HERE
8/15/2002
00:13:37
|
 Subject: IAT
IP: Logged
Message:
Does anyone know where the IAT sensor is on a '92 318 dakota. Also, if I got a k&n intake, is there a place to reposition it to on that? Any help would be cool.
|
NOSSTEVE
Dodge Dakota
JOIN HERE
8/15/2002
10:54:29
|  RE: IAT
IP: Logged
Message:
WHAT TYPE OF SET UP DO YOU HAVE NOW,INTAKE ,ETC?
I DO CUSTOM INTAKES,CAN E-MAIL A PIC.AND HAVE RELOCATED AIR METER.
|
Kellen
Dodge Dakota
JOIN HERE
8/15/2002
18:51:58
|  RE: IAT
IP: Logged
Message:
At this point my engine is completely stock. However, the first thing I am planning on doing to it is getting an intake and a 180 t-stat. I'm probably gonna get that stuff pretty soon, and I'd like to move the IAT as well. I'm not exactly sure what intake setup I should get, or possibly build on my own. I do know it would probably be tough to do a decent heat sheilding job on the intake if I did make my own. I'm also not quite clear on what I should use between the TB and the intake arm. I dont want to use the stock airhat, I want to make sure the air is pushed directly into the TB, and not allowed to swirl around in there. One last thing about the intake: What to use to attach all the peices of the intake together. Is there some type of glue that works good? I know this is kind of turning into help-me-out-with-my-intake, but wutever.
|
NOSSTEVE
Dodge Dakota
JOIN HERE
8/15/2002
19:28:18
| RE: IAT
IP: Logged
Message:
THE BEST WAY IS TO WELD THE PIECES TOGETHER,OR USE RUBBER COUPLINGS. I E MAILED YOU A PIC.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
