Forums
Forum Tools
|
 |
05:47:48 - 04/20/2024
V8 Dakotas
| From | Message |
5pnt9ltrluv
R/T
 
7/10/2002
19:16:21
|
 Subject: New pic of Mah Truck!!!
IP: Logged
Message:
Here is a new pic of my truck.
http://www.digifuge.com/rt7.JPG
Exterior mods are:
Steel Roll pan (APC)
GTS style hood (Premier-Automotive)
R/T bumble bee stripe (Phoenix-Graphix)
Hotchkis 2/3 drop with Bell Tech Nitro drop shocks
BFGoodrich g-force KDW 275 40/ZR17
Tint (of course)
Street Scene mesh grille
APC Altezza's
Billet fuel door
Oh, btw.....IT IS SUPERCHARGED NOW TOO!!!!!!!
True dual Flowmaster 40's, MSD 6A w/ Blaster SS coil, Taylor Spirocore 8mm, 360 Intakez w/ 9" K&N, Flowmetrics 50mm throttle body, JBA headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v, Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks
|
5pnt9ltrluv
R/T
7/10/2002
19:23:32
| RE: New pic of Mah Truck!!!
IP: Logged
Message:
WOOHOO!!!
Kris
Powerdyne w/ 9#, True dual Flowmaster 40's, MSD 6A w/ Blaster SS coil, Taylor Spirocore 8mm, Flowmetrics 50mm throttle body, JBA headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v, Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks
|
scott
Dodge Dakota
JOIN HERE
7/10/2002
19:47:59
|  RE: New pic of Mah Truck!!!
IP: Logged
Message:
Looks great....but.....How does it run NOW!
Thats what everyone wants to know!
|
5pnt9ltrluv
R/T
7/10/2002
20:37:02
| RE: New pic of Mah Truck!!!
IP: Logged
Message:
It runs like a bat outta hell... I need to put on the auxillary fuel pump still cause it starves out at about 4000rpm in second. But other than that, it smokes a$$!!!!
Also, my throttle body is a bit buggy as the linkage seems to be a bit sticky. But problem soon solved.
I must say, the truck hauls enough a$$. It is kinda scary...heheh
For $hits and giggles, I took it out on a road that was 35mph and tripled it...man...oh man...oh man...I don't think I'll be doing that again...
TRACK TIME!!!!
Kris
Powerdyne w/ 9#, True dual Flowmaster 40's, MSD 6A w/ Blaster SS coil, Taylor Spirocore 8mm, Flowmetrics 50mm throttle body, JBA headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v, Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks
|
D
Dodge Dakota
JOIN HERE
7/11/2002
00:55:56
| RE: New pic of Mah Truck!!!
IP: Logged
Message:
damn the truck looks good, definately a
transformation from the pic on your signature..
I bet you're glad you traded in that 2.5L for that
beast.
|
kota on 20s
GenIII
7/11/2002
03:27:55
| RE: New pic of Mah Truck!!!
IP: Logged
Message:
kris, are you running a msd btm? how hard was it to install? how long did it take, and do you have the aux belt tencioner?
sorry for all of the question's but i am about to buy a powerdyne (i got a realy good deal on a used one) and i want a little heads up.
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
5pnt9ltrluv
R/T
7/11/2002
09:29:49
| RE: New pic of Mah Truck!!!
IP: Logged
Message:
D- Thanks!! And yes I am SO glad I did, but I still miss her!
Kota- Yes I have the BTM, but I have not installed it yet. I am prolly gonna do it today or tomorrow. I also am using only one tensioner, but I think I am going to get the one Bernd has for it because of the notorious belt squeals. I must say, the S/C kicks booty...
Kris
Powerdyne w/ 9#, True dual Flowmaster 40's, MSD 6A w/ Blaster SS coil, Taylor Spirocore 8mm, Flowmetrics 50mm throttle body, JBA headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v, Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks
|
WallyR
Dodge Dakota
JOIN HERE
7/11/2002
10:10:49
| RE: New pic of Mah Truck!!!
IP: Logged
Message:
Nice truck, neighbor!!
Let me get this straight-you did 105 in a 35 in LAKE DALLAS??? You must have your laptop in your cell. Brave, my friend, very very brave!
Wally
|
IntenseDak39
*GenIII*
7/11/2002
10:38:12
| RE: New pic of Mah Truck!!!
IP: Logged
Message:
lookin good kris!!!!!
intensedak3.9
|
5pnt9ltrluv
R/T
7/11/2002
11:40:23
| RE: New pic of Mah Truck!!!
IP: Logged
Message:
WallyR- Where are you living? I did not do it in Lake Dallas, I did it going down Carroll Blvd in Denton!!!!!!
Kris
Powerdyne w/ 9#, True dual Flowmaster 40's, MSD 6A w/ Blaster SS coil, Taylor Spirocore 8mm, Flowmetrics 50mm throttle body, JBA headers, Autolite 3923's, 180 degree T-stat, TPS @ .725 v, Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks
|
WallyR
Dodge Dakota
JOIN HERE
7/11/2002
11:54:23
| RE: New pic of Mah Truck!!!
IP: Logged
Message:
Yee haw-I'm out in Wide-Awake-Wylie.
You're braver than I thought-Denton's even worse!
Wally
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
