| From | Message |
Troy
Dodge Dakota
JOIN HERE
6/01/2002
14:47:07
|
 Subject: Comp Cams roller rockers
IP: Logged
Message:
Does anyone have an experience with these? I would like to know how easy they are to install, how noisy compared to stock, quality, etc. I am looking into getting the stainless steel ones, but I am not sure yet. Anyone know the part#: can't seem to find them on Comp Cams website. Thanks.
2000 QC 4x4 5.9L
|
jason
Dodge Dakota
JOIN HERE
6/22/2002
01:03:03
|  RE: Comp Cams roller rockers
IP: Logged
Message:
ya, they are easy to put in i'm 18 and it took me about 10-20 min's with the engine out. It makes a big diffrence it gives it a low pitch noise like a rumble plus it depends on how the lift is on the cam the bigger the more deepness the sound is plus i would requemend a mopar headers i have it and it is perfect!
|
51coronet
Dodge Dakota
JOIN HERE
7/26/2002
11:08:04
| RE: Comp Cams roller rockers
IP: Logged
Message:
what is the part number???? It should say on the top of the rocker.
|
51coronet
Dodge Dakota
JOIN HERE
7/26/2002
11:10:13
| RE: Comp Cams roller rockers
IP: Logged
Message:
This is for the 5.2 or 5.9 liter magnum engine so if anyone has the stainless steel 1.6 or 1.7 roller rockers from comp cams please share the part number. It will have a number on the top of the rocker arm.
|
kota on 20s
GenIII
7/26/2002
11:10:57
| RE: Comp Cams roller rockers
IP: Logged
Message:
its going to take a LOT longer than 20min with the engine in the truck. i will probably take you that long to get the driver side valve cover off ;-)
Eric, 98 5.2 5speed, K&N gen II, 50mm TB, 2bbl M-1, 1.7RR's, JBA ciramic headers, carsound cat, dumped gibson, and a lot more
|
Eazy
Dodge Dakota
JOIN HERE
7/26/2002
11:54:07
| RE: Comp Cams roller rockers
IP: Logged
Message:
KRC Performance has them. You can call them to find out the part number or to get info on them.
www.krcperformance.com
|
51coronet
Dodge Dakota
JOIN HERE
7/26/2002
13:34:16
| RE: Comp Cams roller rockers
IP: Logged
Message:
I have asked krc and they refuse to give the part number they are using. They were realy jerky about it also. They tried to give some piss poor reason that its like giving out summit racings phone number. I said summit racing wan't people to call them and buy stuff and I'm sure they would not mind if more people called for that reason. KRC sells cams for $50 more than what you would pay for them at summit also. The cams they sell are from comp cams and sell for $240 from summit. If you wan't more info go to the comp cams website online catalog and look at the cams for 1992-present computer controlled chrysler with 1.6 ratio rocker arms. Then go to summit and type in the part number. Be sure to have CCA- before the part number signifying that comp cams is the manufacturer.
|
MikeD
*R/T*
7/26/2002
13:42:17
| RE: Comp Cams roller rockers
IP: Logged
Message:
I've gotten the Comp Cams 1.6 RR's haven't installed them yet but keep in mind they'll need a conversion kit that includes the conversion studs. When I ordered them from KRC they sent me the Crane Conversion Kit.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
51coronet
Dodge Dakota
JOIN HERE
7/26/2002
14:06:40
|  RE: Comp Cams roller rockers
IP: Logged
Message:
Mike D,
what is the part number on the rocker arms????
|
MikeD
*R/T*
7/26/2002
14:46:57
| RE: Comp Cams roller rockers
IP: Logged
Message:
I'm at work now but I get off at 2:30 and I'll go home and check it out and post it.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
5pnt9ltrluv
R/T
7/26/2002
14:58:55
| RE: Comp Cams roller rockers
IP: Logged
Message:
Hey, little known secret from KRC...When I ordered my Crower 1.7 Roller Rockers from KRC, the rockers were dropshipped from TruckPerfomance.com... Just so that you know...
Kris
Powerdyne w/ 6#, True dual Flowmaster 40's, MSD 6BTM w/ Blaster SS coil, Taylor 8mm, Flowmetrics 50mm t- body, JBA headers, Autolite 3923's, 180 degree T-stat, , Ported 1.92 R/T heads, 4bbl M1, 24# injectors, Crower 1.7 Roller Rockers, Hotchkis 2/3 w/ Nitro shocks, GTS hood
|
MikeD
*R/T*
7/26/2002
17:17:19
| RE: Comp Cams roller rockers
IP: Logged
Message:
It has a sticker on the side I'm thinkin its the Comp Cams sticker, if it is...here's the number...
1131-16
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
51coronet
Dodge Dakota
JOIN HERE
7/26/2002
17:19:31
| RE: Comp Cams roller rockers
IP: Logged
Message:
MikeD,
what about on the rocker arm itslef? Is there a number on there?
|
MikeD
*R/T*
7/26/2002
17:32:22
| RE: Comp Cams roller rockers
IP: Logged
Message:
On the rocker its stamped 2 rows...
1st row...1131
2nd row...1.60 (which probably means 1.6 ratio)
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
51coronet
Dodge Dakota
JOIN HERE
7/26/2002
17:35:05
| RE: Comp Cams roller rockers
IP: Logged
Message:
Thanks for the info Mike. That is a ford roller rocker. I thought krc was using a chevy roller rocker. Now I know.
Thanks again
Jason
|
MikeD
*R/T*
7/26/2002
17:44:56
| RE: Comp Cams roller rockers
IP: Logged
Message:
Comp is a Chevy rocker...KRC sells Comp Cams rockers.
~Mike~
Get In...Sit Down...Shutup...& Hangon
|
rtdkota
Dodge Dakota
JOIN HERE
7/27/2002
01:27:31
| RE: Comp Cams roller rockers
IP: Logged
Message:
Hey Little known secret--
That's cause SOMETIMES, when the manufacture is backordered, and you have a customer that absolutely needs the rockers asap-- to make 'em happy you buy from whomever has them--even at a higher price!
I sell 'em to everyone!--- Anyone that need's 'em.
Sam
www.socaldakota.com
|
rtdkota
Dodge Dakota
JOIN HERE
7/27/2002
01:27:33
| RE: Comp Cams roller rockers
IP: Logged
Message:
Hey Little known secret--
That's cause SOMETIMES, when the manufacture is backordered, and you have a customer that absolutely needs the rockers asap-- to make 'em happy you buy from whomever has them--even at a higher price!
I sell 'em to everyone!--- Anyone that need's 'em.
Sam
www.socaldakota.com
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
