Forums
Forum Tools
|
 |
04:11:54 - 04/25/2024
V8 Dakotas
| From | Message |
basonj
Dodge Dakota
JOIN HERE
10/02/2008
22:19:30
|
 Subject: How many..
IP: Logged
Message:
I've got a 99 Dakota 4x4 Sport. I can only find 5 grease fittings, 2 at each of the front wheels and 1 on the drive shaft. Is that all or am I missing some? I just started changing the oil in it myself and wanted to make sure I was lubing everything that needed it. Also, is there somewhere online that I can find diagrams or should I just buy a Chilton manual? Thanks in advance.
|
intensedak39
*GenIII*
10/03/2008
18:05:49
| RE: How many..
IP: Logged
Message:
not all these will have grease fittings, but here's a few places to look
pitman arm
idler arm
two inner tie rods
two outer tie rods
two lower ball joints
two upper ball joints
front driveshaft
u-joints
now like i said, some of those parts don't come greasable from the factory and some do.. and if some of them have been changed to an aftermarket piece, there's a good chance it does have a fitting.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
