Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
00:34:38 - 04/26/2024

V8 Dakotas
FromMessage
Jayson
Dodge Dakota
JOIN HERE
 Email

5/19/2002
19:56:07

Subject: viper rims
IP: Logged

Message:
Will 6 hole viper rims fit a 6 hole dakota lug pattern, it's a 97 5.2 4x4 slt?



Troy
Dodge Dakota
JOIN HERE


5/19/2002
20:59:26

RE: viper rims
IP: Logged

Message:
Yes, the bolt pattern is the same. You will probably have to run the front (13") Viper wheels on all four corners. The rear Viper wheels would most likely rub the inner fender on the bed.



Jayson
Dodge Dakota
JOIN HERE
 Email

5/19/2002
21:35:21

RE: viper rims
IP: Logged

Message:
thank you



Josh
Dodge Dakota
JOIN HERE
 Email

11/19/2003
23:05:11

RE: viper rims
IP: Logged

Message:
Same question, someone would sell me a set from a 95 (17x10 and 17x13) for $800, came off when brand new. My truck is lowered 2 in front and 2 1/2 in back...would this serve as a problem on the front?



ray
Dodge Dakota
JOIN HERE
 Email

10/28/2005
00:41:45

RE: viper rims
IP: Logged

Message:
i'm am looking at putting on a set of viper wheels on my 93 dakota right now. the fronts fit fine, with little work rears will fit with 13" wide rims. my dakota is lowered 6" front 7" rear. it should look great with viper rims on it.



ASDFGH
Dodge Dakota
JOIN HERE


10/30/2005
18:47:00

RE: viper rims
IP: Logged

Message:
my home boy wanted to do that and he couldn't find any for sale.
i sucks for me because i was gonna get his R/Ts for FREEEEEEEE. HEHE



ray
Dodge Dakota
JOIN HERE
 Email

10/30/2005
19:34:02

RE: viper rims
IP: Logged

Message:
go to lakeshore wheel & tire. they sell exact reproduction rims for under $350. they have 1992 thru 2005. the older styles are around $225 and up. if you have any other questions on dakota's you can e-mail me at racingsince77@yahoo.com i am pretty good about returning e-mails. my 93 puts 259.4 hp & 304 ft to the rear tires with a v6. easy to do!



terry
Dodge Dakota
JOIN HERE
 Email

11/02/2005
21:44:24

RE: viper rims
IP: Logged

Message:
I have an '00 Quad Cab. wouldn't mind Viper wheels! does anyone know the offset and/or backspacing on the 18 x 10, 18 x 13 or the earlier 17 x 10 & 17 x 13's. thks.



ray
Dodge Dakota
JOIN HERE
 Email

11/03/2005
10:30:52

RE: viper rims
IP: Logged

Message:
they very by manufacturer. but most have 50mm back spacing. get a hold of lakeshore wheel & tire on the internet. contact them they can tell you for sure. the 97 and newer rims would probably look the best on a 00 quad cab.




   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.