Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
09:20:43 - 03/29/2024

V6 Dakotas
FromMessage
GB2000
GenIII
 User Profile


8/16/2004
21:41:47

Subject: RE: Crankshaft Position Sensor Mod
IP: Logged

Message:
I've heard when that sensor goes bad, your engine doesn't run...period. Not sure if that's true, but that's what I heard.

Josh

http://www.cardomain.com/id/sentenced

daffydak
GenIII
 User Profile


8/16/2004
22:20:58

RE: Crankshaft Position Sensor Mod
IP: Logged

Message:
yeah if the sensor goes bad, you get NO spark. the PCM won't know where the crank is, and can't set your timing...

Dan

MOPAR=More Power!!

GB2000
GenIII
 User Profile


8/17/2004
03:03:19

RE: Crankshaft Position Sensor Mod
IP: Logged

Message:
I will hopefully be doing this mod tomorrow...I've got the sensor modified and ready to go on, just waiting for my friend to get new plastic fasteners for me so I can put my inner fender back on. I gotta remember to put the camera's batteries on the charger as well...it's dead enough it'll run out part way through the installation.

Josh

http://www.cardomain.com/id/sentenced

GB2000
GenIII
 User Profile


8/19/2004
05:36:47

RE: Crankshaft Position Sensor Mod
IP: Logged

Message:
Sensor is in...I ran out of daylight when I did the mod so I only got one pic before it got dark and we were using flashlights. Plus some neighbor girls came to watch and we totally forgot about it. I went in through my inner wheel well and it was fairly easy...the hardest part was removing/installing the screws because the heat shield was sharp as hell and we kept hitting our hands on it. My friend who helped me do it works at a GM dealership and he hooked me up with some plastic fasteners that are removable/reusable and don't require cutting them apart and the best part was they were over 50% cheaper than the OEM ones that required being cut off. Anyway...the point of that is, I can easily remove my inner fender, so I may go within the next day or so and take enough pics to post a how-to for everyone who hasn't done it and wants to see pics. I know the demand is there.

Josh

http://www.cardomain.com/id/sentenced

J-man
Dodge Dakota
JOIN HERE


8/19/2004
11:25:42

RE: Crankshaft Position Sensor Mod
IP: Logged

Message:
That would be awesome, Josh.



GB2000
GenIII
 User Profile


8/23/2004
16:17:50

RE: Crankshaft Position Sensor Mod
IP: Logged

Message:
I have the how-to done and written up...as of right now it's only written in a Word document (.doc) but I will convert it to a webpage later and make some corrections and stuff. Drop me a message or email (GB2000@woh.rr.com) anyone wanting it as-is...I'll make a new thread when it's been put into it's own webpage. I'm going to go get some sleep, but I'll send it out sometime tonight or early tomorrow.

Josh

http://www.cardomain.com/id/sentenced

Dale Bennett
Dodge Dakota
JOIN HERE
 Email

8/24/2004
12:09:55

RE: Crankshaft Position Sensor Mod
IP: Logged

Message:
i did this mod and the tps sensor mod and 180 deg change and wow what a did difference!!i also have gibson headers, gibson cat-bak, under drive pulley's,air raid intake, and throttle body spacer. she goes pretty good now..



  <<Oringinal Post <<Previous Page P 2


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.