| From | Message |
Jonah
Dodge Dakota
JOIN HERE
8/08/2004
15:22:23
|
 Subject: VSS and Tach Wire Location
IP: Logged
Message:
I was wondering if anyone could tell me the locations of the VSS(Vehicle Speed Sensor) wire and the tach wire on a 1988 3.9 Liter Dakota because i am installing an Audiovox cruise control on my truck and the installation instructions given just plain out suck. The reason i am installing this is because i will be driving about 50 miles ,one way, a day. Any help would be appreciated. Thanks guys.
|
boardmarine
Dodge Dakota
JOIN HERE
8/08/2004
17:23:18
|  RE: VSS and Tach Wire Location
IP: Logged
Message:
Tach wire should be the negitive side of the coil. VSS should be on the trany. Also see if you can use a magnetic pick-up for your cruise control.
|
boardmarine
Dodge Dakota
JOIN HERE
8/08/2004
17:44:03
|  RE: VSS and Tach Wire Location
IP: Logged
Message:
Sorry Jonah, found something better:
1987-93 Dodge Dakota Cruise Information
Constant 12V+ Pink/Black Ignition Switch Harness or Use Hot Side of Brake
Switched 12V+ Dark Blue Ignition Switch Harness
Ground Use Chassis Near Cruise Control Module
Hot Side of Brake n/a Brake Switch
Cold Side of Brake White or White/Tan Brake Switch
Tach Gray Coil
VSS Lead Yellow/Orange Wire Harness from Transmission
Pulses Per Mile 8000 PPM
|
Jonah
Dodge Dakota
JOIN HERE
8/08/2004
18:36:22
| RE: VSS and Tach Wire Location
IP: Logged
Message:
Thank you very much boardmarine. That is a great help. You're the man.
|
91Dakota
Dodge Dakota
JOIN HERE
8/10/2004
20:02:08
| RE: VSS and Tach Wire Location
IP: Logged
Message:
I concur. I add the Audiovox system to my 91 Dakota.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
