Forums
  Forum Tools
|
|
05:01:15 - 12/10/2024
V6 Dakotas
From | Message |
Mikel Dodge Dakota JOIN HERE
7/08/2004 11:22:48
|
Subject: Engine misfiring?? IP: Logged
Message: I have a 3.9L Dak and I just replaced my spark plugs with another set of Autolite 3923's set at .040 gap, and some NAPA replacement spark plug wires, and now when I start the truck up it vibrates really bad in reverse and drive, and sounds like it might be misfiring or not firing on all cylinders. But it sounds fine in park. Help please.
|
? Dodge Dakota JOIN HERE
7/08/2004 12:46:40
| RE: Engine misfiring?? IP: Logged
Message: REcheck spark plug gap..
Probably better at .045 - my 95 liked that..
and was acting just like yours at only .040
These " computer controlled " setups are
a real PAIN..
|
another mark Dodge Dakota JOIN HERE
7/08/2004 12:59:49
| RE: Engine misfiring?? IP: Logged
Message: double check you put all the wires on the correct plugs
|
IntenseDak39 *GenIII*
7/08/2004 13:21:32
| RE: Engine misfiring?? IP: Logged
Message: bingo
remember, firing order is 1-6-5-4-3-2
driver's bank is 1-3-5
passengers bank is 2-4-6
also remove and check all the plugs to make sure non of them got the tips smashed down... i have had that happen before
6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|
|