Dodge Dakota ForumDodge Dakota PhotosDodgeDakota.net Membership
  Forums   Forum Tools
13:31:19 - 03/28/2024

V6 Dakotas
FromMessage
dak03ota
Dodge Dakota
JOIN HERE


6/10/2004
23:41:07

Subject: BF Tires
IP: Logged

Message:
Does anyone know if I can replace my stock 265/70/16's with 265/75/16 BF Goodrich All Terrains without the problem of the tires rubbing the truck? I have a 2003 Reg.Cab Sport V-6 4x4. I checked my nearest BF Dealer and they were unsure. They said it might possibly fit, but barely if that. They looked at it and said they would have to mount one on, and see if it rubs. If anyone knows if it will or will not fit, that will save me that aggravation and be very much appreciated.



JPear
Dodge Dakota
JOIN HERE
 Email

6/11/2004
00:49:22

RE: BF Tires
IP: Logged

Message:
The 75 series tires should be about 1/2" narrower and just a little taller than your 70 series. I can't imagine there being a problem with the switch.



daddio
Dodge Dakota
JOIN HERE
 Email

6/11/2004
10:25:05

RE: BF Tires
IP: Logged

Message:
try this to compare the 2 tire sizes:
http://www.miata.net/garage/tirecalc.html



dak03ota
Dodge Dakota
JOIN HERE


6/11/2004
23:03:21

RE: BF Tires
IP: Logged

Message:
Thanks for that website. It seems as if its the same tire with a 1 inch difference in diameter. There is not much room in the front wheel wells the way it is. That would mean there would have to be at least a half inch of extra space on either side of the tire to compensate for the extra inch. Did anyone ever try to mount a 265/75/16 on a stock dakota 4x4? Also if it does fit, I will probably need to have the speedometer re-calibrated?



IntenseDak39
*GenIII*
 User Profile


6/12/2004
03:17:01

RE: BF Tires
IP: Logged

Message:
that 1" total diameter isnt gonna set you off more than a mph or two. At 60 you would probably really be going 61-62 mph.

when i put my 26" tires on (dropped about 2.5-3"), i was only going 56 when the speedo said 60 mph.

6.6 Lt. Big Block, 727 TF shift kit, 452 heads, edelbrock 750 cfm, .513/.513 284/300 crower cam, comp cams springs, comp cams pushrods, 1.5 roller rockers, dp intake, mopar ignition, mopar windage tray, dual exhaust w/ 40 series flowmasters, 4.10 gears, coilover drag suspension, approx, 3500 lbs

   P 1


Post a reply to this message:

Username Registration: Optional
All visitors are allowed to post messages


Name:
Email:
Notify me when I get a reply to my message:Yes  No

Icons:            

          

Subject:
Message:
 



Home | Forums | Members | Pictures | Contact Us

This site is in no way affiliated with Chrysler or any of its subsidiaries.