| From | Message |
greendak
Dodge Dakota
JOIN HERE
6/06/2004
22:43:51
|
 Subject: how the heck do you do this?
IP: Logged
Message:
how do you take out the middle seat part in the front that has the fold down arm rest?
|
4
Dodge Dakota
JOIN HERE
6/06/2004
23:19:38
| RE: how the heck do you do this?
IP: Logged
Message:
unbolt the seats and the rest and take out the 2 seat and the arm rest, the rest will b rivited to the seats, i just used a sawzal and cut them apart..when u take out the seats dont forget to disconect the wire under the drivers seat, i kinda just ripped it out
|
GB2000
GenIII
6/07/2004
00:05:31
| RE: how the heck do you do this?
IP: Logged
Message:
4 hit the nail on the head... as a tip for unbolting the seats if you're as stupid as me. The front bolts are easy. To reach the rear bolts, slide the seats all the way forward and then lean them forward. Don't be a freakin moron like me and try to reach the bolt by going under the seat...lol. Also, I drilled the rivets out to get the middle section detached from the seats. I think there are 4 rivets you have to drill/cut out. 2 small diameter, 2 large diameter. Wear safety glasses...I broke one of the drill bits off and launched metal fragments all over the place.
Josh
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
