Forums
  Forum Tools
|
|
04:51:18 - 12/10/2024
V6 Dakotas
From | Message |
Ronder Dodge Dakota JOIN HERE
5/24/2004 08:48:06
|
Subject: Plugs, Cap&Rotor and Wire Changed... IP: Logged
Message: Did the tuneup this weekend-
Champion Plugs(oem)
Napa brass Cap and rotor
Napa 7mm wires
And My ? is- The wires were all alittle short so I tried to attach them to the "wire holders" but most could not be attached like the ones I took off. Is there a problem with this and can wires touch each other? The motor runs so quite now, I hear a tick, tick sound......?
I noticed that the coil wire that was on it just cane from the cap and laid on the valve cover as it went to the coil, so I laid it just like the one I took off.....
Thanks ,
Ronder
PS. I did a diagram of were the wires went as I took them off, but somehow screwed up...But happily found the post about cap wire postion and cylinder position.... then it started and runs smoothly!!!!!! THANKS
|
GB2000 GenIII
5/24/2004 08:55:40
| RE: Plugs, Cap&Rotor and Wire Changed... IP: Logged
Message: I'm hearing a tick tick tick after changing my plugs to the AP3923's...if I get under the hood and listen to it, I hear nothing, but if I'm in the truck with my windows down and there's something next to me the sound echoes off and into the cab so I can hear it.
Josh
|
| P 1 |
|
Post a reply to this message:
Username Registration: Optional All visitors are allowed to post messages
|
|