| From | Message |
israel
Dodge Dakota
JOIN HERE
4/08/2004
01:51:45
|
 Subject: waterproofing ignition
IP: Logged
Message:
Ok my truck is a pussy its a good truck but if it gets the least little water on the distributor or plug wires or plugs it misses worse than me on a freethrow line how can I make my truck water and mud worthy ?
thanks izz
2000 dodge dakota 4x4 3.9 3" body lift 31x10.50 tires chip ,jba headers cold air intake 160 thermostat, Mcleod clutch
|
GB2000
GenIII
4/08/2004
02:45:24
| RE: waterproofing ignition
IP: Logged
Message:
Get a new distributor cap and new plug wires...
Josh
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
Deep Purple
*GenIII*
4/08/2004
07:56:04
| RE: waterproofing ignition
IP: Logged
Message:
Spray your cap and plug wires with silicon ignition spray from the auto parts store. Good luck.
|
Warthog3
Dodge Dakota
JOIN HERE
4/08/2004
08:05:41
| RE: waterproofing ignition
IP: Logged
Message:
Dielectric grease works great. Just take apart and fill each conection with it.
|
uh
Dodge Dakota
JOIN HERE
4/09/2004
22:12:44
| RE: waterproofing ignition
IP: Logged
Message:
that don't stop arcing from between the wires it only insures no corrosion at the connection. if the cap is cracked it don't help either.
|
israel
Dodge Dakota
JOIN HERE
4/10/2004
16:25:52
| RE: waterproofing ignition
IP: Logged
Message:
THANKS BEEN WORKIN ON IT NARROWING IT DOWN TO THE WAY THE PLUGS ARE SET ON THE SIDE OF THE ENGINE AND THE GUARDS AROUND THEM i GOT NEW PLUGS WIRES AND DISRIBUTOR ....THE PLUGS WITH THE GUARDS ON THEM HOLD WATER DIRT MUD AND OTHER SH!T PAIN IN THE ASS BUT ILL EVENTUALLY GET IT
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
