Forums
Forum Tools
|
 |
03:20:26 - 04/23/2024
V6 Dakotas
| From | Message |
Johnny
Dodge Dakota
JOIN HERE
3/17/2004
22:38:51
|
 Subject: 3.7 intake, chip, turbo
IP: Logged
Message:
Hello,
I would like to find performance parts for a 3.7 dakota....... Will Jeep libery parts works since it's the same engine and made by Chrysler.
Thank you,
|
ptittle
Dodge Dakota
JOIN HERE
12/21/2010
13:19:57
| RE: 3.7 intake, chip, turbo
IP: Logged
Message:
a jeep liberty throttle body spacer will work ..why airaid does not sell one for Dakota is beyond me but I called Chrysler factory and found out every part has the same id# number at factory only at dealer they change #s throttle body , intake and all parts interchange. also I have a G-force chip for 69.00
from G-Force.com It is amazing the amount of torque you get. you can make your own air intake system for half the price of airaid, k&n and, you can do it with spectre piping and configure your own. I put E-3 plugs in and what a difference a plug makes. I have a flow master 40series muffler. factory called me and promised it would give at least 10 horses- with all of these items I have increased hwy mileage by 7.5 miles per gal @65-72 miles per hr it is hard to believe all of this for less than 300.00 I would not recommend putting headers on ---because it is not worth the money for increase hp. you can easy get 290 to 300 horses out of these changes. It is not worth changing for a v-8---------UNLESS you put Hemi in.
|
jandjauto
GenII
12/23/2010
00:32:29
| RE: 3.7 intake, chip, turbo
IP: Logged
Message:
hughes engines.com will mod your exsisting
throttle body and they dyno out around a 16hp
gain
The fastman and F&B also make modded throttle
bodies for the 3.7
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
|
