| From | Message |
bemoore
Dodge Dakota
JOIN HERE
3/02/2004
14:23:16
|
 Subject: bolt size
IP: Logged
Message:
what size hex head is used to hold on the calipers on a 2002 cc dakota i cant find one to fit it i asked a guy at deelership he said he didnt know they have a kit with it but dont know the size is
|
Dave B.
Dodge Dakota
JOIN HERE
3/02/2004
21:54:30
| RE: bolt size
IP: Logged
Message:
The Caliper pins on my 1998 Dakota uses a 7 MM hex wrench. I am not sure if this is the same for the 2002.
Hope this helps,
Dave B.
|
bemoore
Dodge Dakota
JOIN HERE
3/03/2004
11:19:02
| RE: bolt size
IP: Logged
Message:
i figured it out last night its a pain in the a$$doing your breaks in the dark with a flash light in your mouh
|
mxjamie540
Dodge Dakota
JOIN HERE
3/04/2004
04:19:49
| RE: bolt size
IP: Logged
Message:
I believe they are a #T45 torx, not a allen.
|
bemoore
Dodge Dakota
JOIN HERE
3/04/2004
07:54:55
| RE: bolt size
IP: Logged
Message:
it was a 7mm hex head
|
slopehead
Dodge Dakota
JOIN HERE
3/04/2004
16:51:14
| RE: bolt size
IP: Logged
Message:
my guys out on the machine shop floor say a 7mm hex wrench will fit into a T45. My Dakota shoop manual says the bolt head socket is T45.
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
