| From | Message |
Frank N.
Dodge Dakota
JOIN HERE
2/25/2004
21:03:41
|
 Subject: HELP ME!!!!
IP: Logged
Message:
i installed my spark plugs today "Autolite" 3923's on my 3.9 and when i started the truck it seemed fine, and after i was out of park the truck staretd to shake bad.. what can it be?
|
tazzy
GenIII
2/25/2004
21:06:44
| RE: HELP ME!!!!
IP: Logged
Message:
Check all connections...
The AP3923's Top connecter is screwed on..make sure thats tight..and the wires have a good connections..
Also..make sure the wires are on the correct plug..
|
J and J Auto
GenII
2/26/2004
15:03:36
| RE: HELP ME!!!!
IP: Logged
Message:
Did you check the gap
and are they 3923 or AP3923
check the wires be sure none are worn through
rubing and arcing against something and tight on
plugs and cap
Larry
J&J Auto
|
Frank
Dodge Dakota
JOIN HERE
2/26/2004
16:09:34
| RE: HELP ME!!!!
IP: Logged
Message:
oh man thats what it could be, what's the differance
|
frank
Dodge Dakota
JOIN HERE
2/26/2004
16:13:28
| RE: HELP ME!!!!
IP: Logged
Message:
what am i supposed to use.. they came in an orange box.. ill check when i get home...
|
J and J Auto
GenII
2/26/2004
17:34:06
| RE: HELP ME!!!!
IP: Logged
Message:
either will work you just need to gap them diff
reg 3923 gap .035 to .040
Ap plat tip .040 to .045
check your plug wires sounds like 1 is shorting
Larry
J&J Auto
|
FRANK N
Dodge Dakota
JOIN HERE
2/26/2004
17:40:34
| RE: HELP ME!!!!
IP: Logged
Message:
hmm.. okay thanks man, yeah i was pretty scared i thought i messed up my truck, my dad was kinda mad, and everyone at school was like thats ucks, my truck is probably one of the best here at my school, well thanks a lot... i guess im going to pull out all my plugs and try again
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
