| From | Message |
brandon
Dodge Dakota
JOIN HERE
2/25/2004
20:15:37
|
 Subject: How big TB
IP: Logged
Message:
im lookin on the net and i see that a 52mm TB is gunna give a v8 the best performance, now does that applie to a v6 as well or should you go with a 50mm for a v6
|
93Dakota
Dodge Dakota
JOIN HERE
2/25/2004
20:29:54
| RE: How big TB
IP: Logged
Message:
52mm for a V6 is too big. You will loose alot of
low end. A plain stock V8tb depending on your yr
of truck will work just fine.
48mm, torqe step makes it 50mm. Carpart.com may
have some used ones around $100. An aftermarket
fastman or F&B is even better. Will loose no
low end and gain all up and down.
|
GB2000
GenIII
2/25/2004
20:59:52
| RE: How big TB
IP: Logged
Message:
What he said ^.
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
J and J Auto
GenII
2/26/2004
15:06:15
| RE: How big TB
IP: Logged
Message:
V8 or aftermarket
A bigger TB will lose low end and why would you
even try it when the bores in the manifold are
only 48mm
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
