| From | Message |
Jay Wingate
Dodge Dakota
JOIN HERE
2/23/2004
08:03:46
|
 Subject: Injectors
IP: Logged
Message:
Has anyone tried the Design III injectors in place of their Design II? I see that Five0MotorSports is offering them. Just wondered if they were worth the change.
|
FuelPump
Dodge Dakota
JOIN HERE
2/23/2004
13:00:34
| RE: Injectors
IP: Logged
Message:
Are they Ford or Bosch?
|
J and J Auto
GenII
2/23/2004
17:44:50
| RE: Injectors
IP: Logged
Message:
FMS ford motor sports made by Bosch
Matched within 2% of each other factorys are 15%
they give you an overall smother running motor
with better mid and top end performance and a
smother idle
And on a lot of trucks better gas mileage
A very good upgrade over stock injectors
the factory injectors on these trucs are design 1
1 hole
design 2 4 hole
design 3 6 hole spray pattern
yes they should work better I have the 4 hole and
they were a lot better than the 1 hole
I plan on trying the 6 hole someday myself better
atomization of the fuel
give them a few hundred miles for the comp to trim
them and they run great
They
Larry
J&J Auto
|
J-Man
Dodge Dakota
JOIN HERE
2/24/2004
11:53:16
| RE: Injectors
IP: Logged
Message:
How many injectors are on the 3.9?
|
Deep Purple
*GenIII*
2/24/2004
12:31:58
| RE: Injectors
IP: Logged
Message:
There six injector, one per cylinder. Do the square connector Design III injectors for the 96-2000 Dakotas have six spray holes?
|
Geargrinder
Dodge Dakota
JOIN HERE
4/01/2004
19:15:14
|  RE: Injectors
IP: Logged
Message:
How hard of a job is it to swap out the injectors?? Is this something that the everyday shadetree wrench'er can do??
|
tazzy
GenIII
4/01/2004
19:19:57
| RE: Injectors
IP: Logged
Message:
|
Geargrinder
Dodge Dakota
JOIN HERE
4/01/2004
19:26:51
|  RE: Injectors
IP: Logged
Message:
Thanks Tazzy....I think I can handle that ..good pics
|
Troy
Dodge Dakota
JOIN HERE
4/01/2004
19:47:47
| RE: Injectors
IP: Logged
Message:
Where can I buy these ford injectors @ for a good price??
|
geargrinder
Dodge Dakota
JOIN HERE
4/01/2004
20:02:59
|  RE: Injectors
IP: Logged
Message:
Tazzy...a few more Q's? i got the info for the fiveomotorsport site which ones doe I need for my 3.9L 19lb injectors (bosch 0280150556 D5B-19lb*)?. I have a early 2000 3.9L (make in 9/99) i was told that I have a 99 style motor (w/ cap & rotor not coil packs.)Is this the best mpg per $$ that I can do?
|
Troy
Dodge Dakota
JOIN HERE
4/01/2004
20:03:27
| RE: Injectors
IP: Logged
Message:
i dont want to make any mistakes purchasing the wrong injectors because they arent cheap. What is the exact name of the injector made by bosch that will fit our dakotas and make an improvement? Is it 19 lb or 21 lb injectors?
|
tazzy
GenIII
4/01/2004
20:13:09
| RE: Injectors
IP: Logged
Message:
Best thing is talk to Bruce at Five O..He will be sure you get the right injectors
|
racerX
Dodge Dakota
JOIN HERE
4/01/2004
21:52:13
| RE: Injectors
IP: Logged
Message:
how can i get in contact with this guy? i'm interested in upgrading my injectors as well
|
GB2000
GenIII
4/01/2004
22:17:17
| RE: Injectors
IP: Logged
Message:
http://www.fiveomotorsport.com/Injector_SetsDODGE.asp
Josh
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
racerX
Dodge Dakota
JOIN HERE
4/01/2004
22:22:51
| RE: Injectors
IP: Logged
Message:
thanks much :)
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
