| From | Message |
sicminds
GenIII
2/12/2004
16:40:06
|
 Subject: efan or sneaky pete, simple question
IP: Logged
Message:
Not sure what to get next. Both are around the same price range.
Efan, could give me up 15hp or so,
and the sneaky pete can give me 50hp and a hit of a switch.
even though the efan would improve mpg, what would you prefer to do?
click me
|
dan
Dodge Dakota
JOIN HERE
2/12/2004
16:49:11
| RE: efan or sneaky pete, simple question
IP: Logged
Message:
i'd go the efan route cooler runnig and less rotational mass and you can proudly tell the next ford /chevy you spank that its all motor :-)
just my 2 cents
by the way if you do go with an electric fan let me know how it goes dshirey@oceanfree.net
thanks
dan
|
slow97dakota
Dodge Dakota
JOIN HERE
2/13/2004
00:43:37
| RE: efan or sneaky pete, simple question
IP: Logged
Message:
sneaky pete by far! i woulkd even say f the snewaky pete system and gte the nxkit but thats me, just take the fan off for right now ( cuz its the winter) and when u get like 50 bones buy 1 off ebay, i really dont think these trucks need anything over 2000 cfm considering my sierra didint and it was v8 and i had a 1600 on it and never had a prob. owell ur truck d what ya want, have fun!
|
sicminds
GenIII
2/13/2004
10:17:46
| RE: efan or sneaky pete, simple question
IP: Logged
Message:
I was looking at getting the black magic 150 which is priced around $200. It might cost more, but it an easy install and it comes with a thermo switch.
I think i am going to go with the SP since its
only around 200 any ways. And next time i race that 4.0L that i just lost to, i will still tell him it all motor. lol.
I would like to go to a full nx kit, but space is limited. I have an RC with a bench seat, so there is really no where for the bottle to go.
Any one know if a 5lb bottle will fit behind the seat?
I would take the fan off slowdak, but i live in fl and temps get to 70 all most everyday. I might still try it, and see how much hp is free'd up.
click me
|
slow97dakota
Dodge Dakota
JOIN HERE
2/13/2004
12:01:14
| RE: efan or sneaky pete, simple question
IP: Logged
Message:
my bad i keep forget not every 1 has cold winters, u can do what im goin, take out the center councel and mount the bottle inbetween the 2 seats. if space is a concern maybe u can use the sneaky pete botle with the full nx kit? just a idea
|
sicminds
GenIII
2/13/2004
16:56:39
| RE: efan or sneaky pete, simple question
IP: Logged
Message:
thanks for the ideal, but i dont have a middle console.
i got a reg cab with a bench seat. So unless i can squeeze it behind the seat i am pretty much outa luck.
click me
|
GB2000
GenIII
2/13/2004
18:13:14
| RE: efan or sneaky pete, simple question
IP: Logged
Message:
Somebody else mentioned that Sawzall's do wonders...go get yourself a Sawzall and have a lil fun with your seat. =P
Why not save a tad bit longer and just get both? Then you don't have to decide between which one to get. lol
Josh
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
sicminds
GenIII
2/14/2004
10:18:51
| RE: efan or sneaky pete, simple question
IP: Logged
Message:
I was wondering if any one has done the efan mod and also added some pulleys.
I was told before not to get pulleys because it would be to hard on other things, since they would be slower. But, if i reduce the drag of the fan, would it be practical to add some pulleys?
click me
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
