| From | Message |
JFH
Dodge Dakota
JOIN HERE
2/12/2004
09:21:04
|
 Subject: Check Engine!!!
IP: Logged
Message:
I recently installed the Mopar Performance computer in my 93 V6 5spd. I know Mopar does not make these anymore, but I got a hold of one from my cousin. I had the battery disconnected while installing. After driving for about 5 min my check engine light comes on, is there better way to reset the computer? How do I let the truck know a new computer was installed?
|
J and J Auto
GenII
2/12/2004
21:38:56
| RE: Check Engine!!!
IP: Logged
Message:
You need to see what code you got
key on off 3 time than on and watch the check
engine light
Binary
1 pause 2 is 12 start of diagnostics
5 pause 5 is 55 end of diagnostics
ant inbetween will be your trouble codes before
anyone can help you we need to know what is
triping the mil light
Discnect batt and hold the key to start for 30
secs, now shut off and reconect batt and try again
if you still get a light need to know what code
The only other way to remove codes is with a scan
tool
Larry
J&J Auto
|
didja
Dodge Dakota
JOIN HERE
2/13/2004
20:05:14
| RE: Check Engine!!!
IP: Logged
Message:
didja burn in the VIN and milage? might be it!
|
J and J Auto
GenII
2/13/2004
23:53:33
| RE: Check Engine!!!
IP: Logged
Message:
didja burn in the VIN and milage? might be it!
Not needed on the OBD 1 That started in 97 or 98
OBD 2
Larry
J&J Auto
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
