| From | Message |
David
Dodge Dakota
JOIN HERE
2/10/2004
22:06:30
|
 Subject: ? for Larry or Anyone !
IP: Logged
Message:
I just got back in town from a two day trip and when I went to start my 87 & it idled for about 5 minutes then died. so I tried to start it back up and I had to hold the gas pedal to the floor to keep it running,( it sounds like the cat is clogged but after it warms up it runs good but when I first start out in the mornings I have to hold the gas down to clear the cat.) last week I tried to cut it off with a saw but the metal was too thick. What do you think I should cut it off with (Besides welding it off) ?
P.s. I have removed my smog pump
Thanks in advance
|
steveo2777787
Dodge Dakota
JOIN HERE
2/10/2004
22:09:40
|  RE: ? for Larry or Anyone !
IP: Logged
Message:
sawzall... solves all.. or a cut off wheel
|
Dan
Dodge Dakota
JOIN HERE
2/10/2004
22:46:38
| RE: ? for Larry or Anyone !
IP: Logged
Message:
just get a heavy chain & tie one end to the cat and the other to a tree, leave lots of slack to build up speed and floor it. Should come right off.
|
another mark
Dodge Dakota
JOIN HERE
2/10/2004
22:51:06
| RE: ? for Larry or Anyone !
IP: Logged
Message:
If you go with the above method would you please video tape this and post it online because I would like to see this. Thanks.
|
GB2000
GenIII
2/10/2004
23:16:25
| RE: ? for Larry or Anyone !
IP: Logged
Message:
Ditto... lmao!
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
xmr
GenIII
2/11/2004
09:55:08
| RE: ? for Larry or Anyone !
IP: Logged
Message:
why take the cat off just disconect the exaust at the rear and use a prybar or a long rod and knock the elements out of the cat. If your cat has started to disintergrate it may have stopped your muffler up in which case it will have to be replaced. If you do this be sure and wear a good dust mask the dust from the cat is not healthy.
'98 cc auto /Home brew cold air with K&N,Dynomax, Superchip Tuner, 1.7 RR,, F&B tb. NAPA cap and rotor, 3923 plugs
|
David
Dodge Dakota
JOIN HERE
2/12/2004
20:51:18
| RE: ? for Larry or Anyone !
IP: Logged
Message:
I think I will go with xmr's plan and see how it works I will keep you informed!
|
Orange
Dodge Dakota
JOIN HERE
2/13/2004
00:58:23
| RE: ? for Larry or Anyone !
IP: Logged
Message:
go to a muffler shop and have them remove it 60 bucks
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
