| From | Message |
Micah
Dodge Dakota
JOIN HERE
2/08/2004
23:12:19
|
 Subject: comp cams
IP: Logged
Message:
anyone have any stats or advice on putting a comp cam in a 3.9L V6 dakota?
|
gen1dak
Dodge Dakota
JOIN HERE
2/09/2004
00:22:17
|  RE: comp cams
IP: Logged
Message:
Don't even see the 3.9 listed in their catalog, so it appears to be a custom-only deal.
|
Micah
Dodge Dakota
JOIN HERE
2/09/2004
22:28:35
| RE: comp cams
IP: Logged
Message:
what does that cost and would it do anything significant for the motor compared to other cams?
|
hey
Dodge Dakota
JOIN HERE
2/10/2004
02:13:32
| RE: comp cams
IP: Logged
Message:
krcperformence sell aftermarket cams for the v6
|
gen1dak
Dodge Dakota
JOIN HERE
2/10/2004
15:29:53
| RE: comp cams
IP: Logged
Message:
And I believe KRC gets their cams ground by Comp Cams. Anyway, a custom cam will run a bit more than an off-the-shelf roller, so I'd plan on killin' $300.
|
slopehead
Dodge Dakota
JOIN HERE
2/10/2004
20:45:59
| RE: comp cams
IP: Logged
Message:
uh guess what gen1dak? krc wants $349 for their off the shelf V6 cam so I would figure more like $425/450 for a custom grind.
|
gen1dak
Dodge Dakota
JOIN HERE
2/10/2004
23:51:04
| RE: comp cams
IP: Logged
Message:
From what I've seen, KRC seems to mighty proud of their stuff, ie $349 for an off-the-shelf, but V8 rollers off-the-shelf are less than $300 from CC and others (please, no lectures on mass-production costs vs volume production). Anyway, 3.9 parts are thin, so it's gonna be high no matter where one goes.
|
gen1dak
Dodge Dakota
JOIN HERE
2/10/2004
23:53:56
| RE: comp cams
IP: Logged
Message:
Best bet would be to call and ask.
|
Micah
Dodge Dakota
JOIN HERE
2/10/2004
23:58:30
| RE: comp cams
IP: Logged
Message:
thanks you guys
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
