| From | Message |
gestalt
Dodge Dakota
JOIN HERE
2/07/2004
15:54:11
|
 Subject: Good IAC Solenoid-- plunger in or out?
IP: Logged
Message:
HELP! TB swap
I purchased a V8 throttle body and removed all the sensors.
Did the same for my V6. Come to find out the IAC of the V6 is extended and the V8 is retracted. (the solenoid port on the TB is now closed using the V6 solenoid where as before, the solenoid port of the V8 TB was origionaly open)
The V8 is from a used parts place
Which one should I use?
|
GB2000
GenIII
2/07/2004
16:18:12
| RE: Good IAC Solenoid-- plunger in or out?
IP: Logged
Message:
Use the one that you know works; the one off your V6 tb.
Josh
Red 98 RC V6 2wd Single in/dual out exhaust (soon to be switched to a flowmaster 40 single in/dual out), s-bolt "mod", Edelbrock 10" round air cleaner w/ K&N air filter, removed rubber flap...and more to come
|
NoNoNo
Dodge Dakota
JOIN HERE
2/07/2004
17:34:43
| RE: Good IAC Solenoid-- plunger in or out?
IP: Logged
Message:
If you pulled on it or turned it you runed it !!!!!! Just leave it alone it will be alright
|
| | P 1 |
|
Post a reply to this message:
Username Registration: Optional
All visitors are allowed to post messages
|
